Engineering / Technical

Site Engineer

Connig Technoserve·Lagos, nigeria·Full Time·Contract
Engineering / TechnicalmanagerFull TimeContract
-Closes Nov 2, 2026

Connig Technoserve is a dynamic telecommunications, information technology and Power services provider operating in Nigeria and parts of West Africa. We provide customized, professional and turnkey services to different operators and vendors. We are long term players in the ICT and power industry. Our staffs have very broad experience and competence profiles laced up with adequate international exposure. As a result of this, we are value driven and highly proactive, able to deliver a wide array of solutions and services. We pay attention to details and utilize superior project, supply chain and management models that guarantee high quality, cost-effective and on-time professional service delivery to clients.

We are recruiting to fill the position below:

Job Position: Site Engineer

Job Location: Lagos

Job Summary

  • The Site Engineer is responsible for supervising and coordinating OSP construction activities, including route surveys, trenching, duct laying, pole erection, fibre installation, splicing and testing, to ensure compliance with approved designs, quality standards and EHS requirements.
  • The role monitors site progress, manages contractors, manpower and materials, resolves technical and community-related issues, conducts quality inspections and fibre testing, maintains accurate site documentation and supports network fault restoration and timely project delivery.

Job Responsibilities

  • Carry out route surveys and site surveys for OSP projects; collect and verify field data such as existing pole lines, ducts, manholes, crossings and obstacles to support design and drawing preparation.
  • Review construction drawings, design documents and Bill of Quantities (BOQ) before site works; identify discrepancies and raise technical queries to the engineering team in a timely manner.
  • Supervise day-to-day construction activities at assigned sites including trenching, duct laying, pole erection, cable laying, splicing, termination and restoration works to ensure compliance with approved designs and specifications.
  • Conduct quality inspections and site acceptance tests on completed works; verify installation against technical standards, record non-conformances and drive corrective actions to closure.
  • Perform and witness fiber optic testing using OTDR, optical power meters, fusion splicers and light source equipment; analyze test results and prepare test reports for acceptance.
  • Ensure strict EHS compliance on site: enforce use of personal protective equipment (PPE), safe working procedures; immediately report and address safety hazards.
  • Coordinate with OSP contractors, subcontractors and work crews on daily execution; track site progress, manpower and material consumption, and communicate any deviations or constraints.
  • Verify material deliveries against project requisitions, control wastage, and maintain site-level material and equipment records.
  • Manage communication with local communities, property owners and relevant authorities regarding site access, wayleave and community issues; minimize disputes and disruptions to work.
  • Prepare and maintain site documents, including daily site reports, as-built records, measurement books (MB), progress photos and handover documentation.
  • Support troubleshooting and restoration of network faults within the assigned region, including emergency call-outs when required.
  • Report site progress, issues and risks to the Regional Manager and support the project team in achieving milestones and acceptance targets.

Requirements:

  • Diploma or Bachelor's Degree in Telecommunications, Electrical/Civil Engineering or a related field.
  • At least 3 years of hands-on experience in outside plant (OSP) construction, site supervision or network roll-out; experience in Nigeria or other African markets is an advantage.
  • Solid technical knowledge of OSP installation methods aerial (pole line), underground (duct & manhole), direct burial, and fiber optic cabling with the ability to read and interpret construction drawings.
  • Proficiency in fiber optic testing and splicing techniques using OTDR, optical power meter, fusion splicer and associated tools; good fault-diagnosis and troubleshooting capability.
  • Good understanding of quality control, EHS standards and Nigerian telecom construction regulations; familiar with site acceptance procedures and as-built documentation.
  • Strong organizational and coordination skills to manage subcontractors, multiple sites and daily schedules.
  • Fluent in English (working language) with clear verbal and written reporting skills; ability to communicate in local languages (Hausa, Yoruba, Igbo) is a plus.
  • Computer literacy in Office (Excel, Word, PowerPoint) and familiarity with CAD or google mapping tools is preferred.
  • Willing to work in the field for extended periods, travel across different sites within the region, and handle physically demanding site environments.

Method of Application 

Interested and qualified candidates should send their CV to: hr@connigtechnoserve.com using the Job Position and Location as the subject of the mail.

Apply Now
Send your CV along with a cover letter tohr@connigtechnoserve.com

Please use the job title as the subject line of your email.

At a glance

Company

Connig Technoserve

Location

Lagos, nigeria

Employment

Full Time

Work style

Contract

Experience

manager

Valid until

November 2, 2026

Created

October 4, 2026

More opportunities

Similar roles you might like

Bricklayer Supervisor At Ascentech Services Limited

Ascentech Services Limited

Lagos, nigeria

full-time

Job Summary We are seeking an experienced Bricklayer Supervisor to oversee bricklaying activities at construction sites, ensure quality workmanship, and supervise artisans and laborers. The ideal candidate must have strong knowledge of block work, site coordination, and safety procedures. Key Responsibilities Supervise bricklayers and site workers on daily operations. Ensure quality and timely completion of bricklaying projects. Interpret construction drawings and measurements. Monitor materials usage and site safety compliance. Coordinate with site engineers and project managers. Requirements Minimum of 3 years experience in bricklaying supervision. Good knowledge of construction processes and site management. Ability to lead a team effectively. Strong communication and problem-solving skills. Candidates residing around Oshodi-Isolo axis will have an added advantage.

2 days ago

Instrumentation And Control Engineer At Beam Energy Limited

Beam Energy Limited

Lagos, nigeria

full-time

Job Responsibilities Instrumentation, Control and Automation Develop and review instrumentation design deliverables: P&ID inputs, instrument index, datasheets, loop diagrams, hook-up drawings, cable schedules, JB schedules, I/O lists, cause & effect diagrams, and control system architecture drawings. Size and select field instruments (flow, pressure, temperature, level, analytical), control valves, PSVs, and actuated valves. Participate in HAZID, HAZOP, SIL assessment, and constructability reviews. Ensure design compliance with hazardous area classification and protection requirements. Develop Instrument Datasheet and System Architecture as well as Bill of Materials Field Instrument Integration and Panel Installation Supervision Define functional requirements Documents for DCS, PLC, SCADA, ESD/SIS, and Fire & Gas systems. Coordinate and witness Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT). Support integration of packaged unit control systems with the main plant control system. Provide site engineering support for instrument installation, tubing, cabling, terminations, and grounding. Supervise loop checks, calibration, functional testing, and pre-commissioning activities. System Integration Services Support commissioning and start-up, punch list closure, and handover documentation. Prepare as-built documentation and turnover packages. Manage the engineering documents in your discipline through the document control system (MDR/TQ/RFI tracking). Support man-hour estimates, progress reporting, and management of scope changes. Enforce HSE, quality on all assigned activities. Project Design Develops and supervise the draughting of Drawings for Specific Projects Develops Bill of Quantities for Projects from shop drawings and from Consultant / Clients drawings for purpose of tendering. Project Planning Prepares Budget and time schedules for Projects Prepares Project Design Drawings, Shop Drawings and "As Built Drawing Ensure Proper handling of Company Tools and Equipment as well as Maintenance Reads and understands Contract Documents Project/Site Coordination Provides Technical Evaluation of Sub-contractors and commercial inputs Attends site meetings with Clients and other Contractors on site Ensures compliance with and implementation of Quality Control procedure for all incoming materials. Delegates authority and ensures subordinates are adequately engaged. Support Commercial Departments for inputs in Tendering with relevant inputs Supervise the Technician and Sub Contractors on site during Installation Ensures cordial relationships with Clients Requirements B.Eng/B.Sc in Instrumentation and Control, Electrical/Electronics. Membership of COREN, NSE or Relevant Professional Body will be of added advantage. Proficiency in the use of Microsoft Excel, Word, Project, Power Point, Visio, PDF; knowledge of use of AutoCAD will be of added advantage. Experience with upstream, midstream, or downstream facilities (flow stations, gas plants, pipelines, terminals, refineries, or offshore platforms). Experience working with international clients and IOCs/NOCs is highly desirable. Qualification: B.Eng/B.Sc. in Instrumentation and Control, Electrical/Electronics Minimum 10 years post qualification experience in the Oil and Gas Sector and/or Power Transmission/Distribution Sector.

2 days ago

Project / Site Surveyor At Domeo Resources International (dri)

Domeo Resources International (DRI)

Akwa Ibom, nigeria

full-time

Job Summary The Project/Site Surveyor is responsible for providing accurate surveying and setting-out services for the Company's construction projects. The role involves establishing survey control points, setting out building and civil works, monitoring elevations, coordinates and alignment, interpreting construction drawings, taking field measurements and providing accurate survey data to guide construction activities. The Surveyor works closely with the Project Manager, Site Engineers, Architects, Quantity Surveyors, contractors and other project personnel to ensure that construction works are executed in accordance with approved drawings, specifications, dimensions and levels. Key Responsibilities Establishment of Survey Control: Establish and maintain site survey control points, benchmarks and reference grids. Verify existing coordinates and benchmarks before commencement of works. Ensure all project survey activities are referenced to approved control points. Maintain accurate records of established control points. Site Setting-Out: Set out building foundations, columns, walls, roads, drainage and other construction elements. Establish grid lines and building positions from approved drawings. Set out structural and architectural elements accurately on site. Confirm all setting-out works before construction proceeds. Levels and Elevations: Establish and monitor site levels and elevations. Check foundation levels, floor levels, structural levels and external works. Monitor slopes and gradients for roads, drainage and other civil works. Immediately report discrepancies in levels or elevations. Interpretation of Drawings: Review architectural, structural and civil engineering drawings. Translate design information into accurate site setting-out requirements. Identify discrepancies between drawings and actual site conditions. Liaise with the relevant consultants where clarification is required. Construction Monitoring: ConstructionConsulting & Contracting Monitor the position, alignment, dimensions and elevation of ongoing construction works. Conduct routine checks on structural elements during construction. Verify that completed works correspond with approved drawings. Report deviations and recommend corrective action. Structural Setting-Out: Set out columns, beams, walls, foundations and other structural elements. Check verticality, alignment and positioning of structural components. Monitor structural elements at different construction stages. Provide survey confirmation before critical construction activities proceed. External and Civil Works: Set out roads, walkways, drainage systems, culverts and other external works. Establish required gradients and levels for civil works. Monitor alignment and elevations throughout execution. Conduct as-built surveys upon completion. Field Measurements and Data Collection: Conduct accurate field measurements and collect survey data. Record coordinates, distances, angles, levels and other relevant information. Process field data and prepare required survey outputs. Maintain accurate field books and digital records. As-Built Surveys: Conduct as-built surveys for completed construction works. Record the actual location, dimensions and levels of completed works. Prepare as-built drawings and survey information. Ensure final survey records accurately reflect the completed project. Survey Equipment Management: Management Operate total stations, GPS/GNSS equipment, automatic/digital levels and other surveying instruments. Ensure survey equipment is properly maintained and protected. Conduct routine equipment checks before use. Report faults and calibration requirements promptly. Quality Control: Conduct independent survey checks on critical construction activities. Verify accuracy before and during execution of major works. Identify survey errors and construction deviations early. Support the project team in maintaining required construction standards. Coordination with Site Team: Work closely with Site Engineers, Project Managers, Architects, Quantity Surveyors and contractors. Attend site coordination meetings where survey input is required. Provide survey information required for construction planning. Coordinate setting-out activities with the construction programme. Quantity and Measurement Support: Provide accurate measurements required by the Quantity Surveyor and project team. Assist in verifying dimensions and quantities of completed works where required. Support measurement of earthworks, excavation, filling and other relevant activities. Provide survey data required for project valuation and reporting. Earthworks and Excavation: Carry out setting-out and level checks for excavation works. Monitor excavation depths and formation levels. Establish cut-and-fill levels where applicable. Provide accurate survey information for earthwork activities. Survey Reports and Documentation: Prepare daily, weekly and project survey reports as required. Maintain field notes, survey records, drawings and measurement data. Document all survey checks and identified deviations. Submit reports promptly to the Project Manager. Site Inspection and Verification: Conduct routine site inspections to verify construction positioning and levels. Inspect completed works before subsequent construction activities commence. Confirm critical dimensions and coordinates. Escalate unresolved technical issues to the Project Manager. Contractor and Subcontractor Coordination: Provide setting-out information to contractors and subcontractors. Monitor survey-related activities carried out by contractors. Verify contractor survey work where necessary. Ensure external survey activities are coordinated with the Company's project requirements. Safety and Site Compliance: Comply with the Company's health and safety procedures. Use appropriate PPE when working on construction sites. Maintain safe working practices when conducting field surveys. Report unsafe conditions observed during surveying activities. Supervision of Junior Survey Staff: Supervise Junior Surveyors, Survey Technicians and Survey Assistants. Allocate field assignments and review completed work. Train junior staff on proper survey procedures and equipment use. Ensure survey activities are completed accurately and on schedule. General Project Support: Participate in project planning and technical meetings when required. Provide technical survey advice to the project team. Support special surveys and investigations assigned by management. Perform other duties related to surveying and construction activities as assigned. Qualifications & Requirements Education: BSc/HND in Surveying, Surveying & Geoinformatics, Geomatics or a related discipline. Professional registration with the Surveyors Council of Nigeria (SURCON) is an advantage and required where the position involves professional surveying practice. SURCON identifies registered persons as Surveyors and regulates the practice of surveying in Nigeria. Experience: 5 - 8 years relevant experience in construction surveying. Proven experience working on building and/or civil construction projects. Strong experience in setting-out, levelling, coordinates and construction monitoring. Experience with Total Station, GPS/GNSS and Auto Level. Experience working with architectural, structural and civil engineering drawings. Experience on major construction projects is an advantage.

4 days ago

Network Engineering Lead At Fieldbase Services Limited

Fieldbase Services Limited

Lagos, nigeria

full-time

ROLE OVERVIEW The Network Engineering Lead will spearhead the design, implementation, operational management, performance tuning, and strategy for Fieldbase's LTE infrastructure and upcoming 5G network expansion. This role requires deep expertise in Mobile Core Networks, combined with strong knowledge of Radio Access Networks (RAN), Transport Networks, IP/MPLS, Microwave Systems, OSS/BSS Integration, and Network Operations. The successful candidate will have spent at least 7 years within a Mobile Network Operator (MNO) or a Tier 1 telecommunications vendor, and will play a pivotal role in building Fieldbase's telecommunications network engineering capability from the ground up. Key Responsibilities Network Strategy, Design & Architecture Core Network Architecture: Design, dimension, and implement a highly scalable, secure Evolved Packet Core (EPC) / 5G Core (5GC). RAN Integration: Lead RF planning, dimensioning, and deployment of Band 40 (2.3 GHz) TDD-LTE infrastructure, including macro cells, small cells, and base stations. Hybrid Backhaul Integration: Architect backhaul routing strategies leveraging Fieldbase's Starlink capabilities and terrestrial fiber to ensure resilient, low-latency connectivity. Deployment & Project Management Vendor & Partner Management: Evaluate, select, and manage relationships with OEM vendors (e.g., Nokia, Ericsson, Huawei, or Mavenir/OpenRAN partners) for Core, RAN, and SIM/eSIM provisioning systems. Site Engineering: Oversee physical site surveys, tower installations, power systems, and equipment commissioning for regional network rollouts. Regulatory Compliance: Ensure all network designs comply with NCC guidelines, spectrum emission limits, and data privacy laws. Operations & Lifecycle Management Network Operations (NOC): Establish operational workflows, KPIs, monitoring tools, and SLAs to ensure 99.99% uptime for enterprise clients. Optimization: Continuously monitor and tune RF parameters, core routing, and QoS policies to optimize network performance and user experience. Security & Troubleshooting: Serve as the Level 3 escalation point for complex core network failures, security breaches, or performance degradation. Private LTE Solutions: Design secure Layer 2 and Layer 3 Private LTE solutions for enterprise customers, including: Oil & Gas Mining Manufacturing Financial Services Critical Infrastructure Operators Leadership & Team Development Build and lead the Network Engineering function, including Core Network, RAN, Transport, NOC, and Field Engineering teams. Recruit, mentor, and develop high-performing engineering talent. Foster a culture of innovation, accountability, operational excellence, and continuous improvement. Candidate Requirement Must-Have Minimum of 7 years' telecommunications engineering experience, including proven tenure within a Mobile Network Operator (MNO) . At least 3 years of hands-on Core Network Engineering experience. Core Network Expertise: Strong experience with LTE EPC and/or 5G Core elements, including MME, SGW, PGW, HSS, PCRF, and 5G Core Network Functions. Radio Access Network Expertise: Practical experience in RF planning & optimization, frequency planning, cell site dimensioning, LTE network design, and TDD-LTE Band 40 (2.3GHz) deployment strategies. Demonstrated experience leading or building a technical team, with direct people-management responsibility. Bachelor's or Master's Degree in Telecommunications Engineering, Electrical/Electronic Engineering, Computer Engineering, or a related discipline. Strongly Preferred Experience with Starlink or satellite backhaul integration. Prior involvement in a network build-out from the ground up (greenfield deployment), rather than only operating an established network. Exposure to Private LTE/5G deployments for enterprise or industrial customers. Certifications (any of the following a plus, not required) CCNP Service Provider / CCIE Service Provider Nokia, Ericsson, or Huawei Core Network Certifications RF Planning Certifications Additional Technical Skills IP Networking: OSPF, BGP, MPLS Layer 2 and Layer 3 VPNs Network Security NFV and SDN Kubernetes and OpenStack SIM/eSIM Provisioning, OTA Management, HSS Administration

8 days ago

Qa / Qc Engineer - Piling & Structural Works At Kimeric Nigeria Limited

Kimeric Nigeria Limited

All, nigeria

full-time

Job Description We are seeking an experienced QA/QC Engineer with strong experience in piling and structural works to ensure quality standards are maintained across construction activities. Key Responsibilities Implement and monitor QA/QC procedures for pile foundations, piers, pier caps, precast segments, and station buildings. Conduct inspections and quality checks to ensure works comply with approved drawings, specifications, and standards. Review method statements, ITPs, test reports, and other quality documentation. Monitor materials, workmanship, and testing activities throughout project execution. Identify non-conformities and follow up on corrective actions. Coordinate with site engineers, subcontractors, and project teams to maintain required quality standards. Requirements Degree in Civil Engineering or related field. Proven QA/QC experience in piling and major structural works. Practical experience with pile foundations, piers, pier caps, precast segments, and station buildings is essential. Strong knowledge of construction inspection, testing, and quality control procedures. Good attention to detail and ability to work effectively in a site-based environment.

9 days ago

Quantity Surveyor At Harmony Garden And Estate Development Limited

Harmony Garden and Estate Development Limited

Lagos, nigeria

full-time

THE OPPORTUNITY The successful candidate will be responsible for planning, monitoring and controlling project costs from project inception through construction and final completion, ensuring that Company resources are utilised efficiently and projects are delivered within approved budgets without compromising quality or safety. The Quantity Surveyor will report operationally to the Construction Project Manager and work closely with the Director of Construction, Project Managers, Procurement, Finance, Site Engineers, Architects, contractors and other relevant stakeholders. KEY RESPONSIBILITIES Cost Planning & Estimation Prepare preliminary and detailed cost estimates for construction projects. Develop project cost plans and budgets. Analyse construction cost risks and identify potential areas of financial exposure. Support project teams in financial planning and cost forecasting. Provide accurate cost information to support project decision-making. Quantity Measurement & Bills of Quantities Prepare, review and update Bills of Quantities (BOQs). Measure construction works accurately and maintain proper quantity records. Verify quantities of completed works. Prepare and review interim valuations and final accounts. Ensure measurements are supported by appropriate site records and documentation. Cost Control Monitor actual project expenditure against approved budgets. Track project costs and identify variances. Analyse cost overruns and recommend corrective actions. Monitor material usage and construction costs. Maintain accurate project cost forecasts. Prepare periodic cost performance reports. Support the Project Manager in maintaining strict financial discipline across assigned projects. Contract Administration Review construction contract documents and commercial terms Monitor contractor compliance with contractual obligations Review and evaluate contractor payment claims. Assess variation orders and change requests. Prepare payment valuations and recommendations in collaboration with the Finance Department. Support the preparation and reconciliation of final project accounts. Maintain proper contractual and commercial documentation. Value Engineering Identify opportunities to reduce project costs without compromising quality, functionality or safety. Evaluate alternative materials, construction methods and technical solutions. Recommend cost-effective alternatives to the project team. Support optimisation of project designs and construction costs. Promote efficient utilisation of Company resources. Financial & Commercial Reporting Prepare Weekly Cost Monitoring Reports. Prepare Monthly Cost Performance Reports. Conduct Quarterly Budget Reviews. Prepare project cost forecasts and variance analysis. Maintain accurate and up-to-date project cost records. Prepare Final Project Cost Reports upon completion. WHAT WE ARE LOOKING FOR We are seeking a commercially astute Quantity Surveyor with strong technical knowledge and practical experience in construction cost management. The ideal candidate should have: 5 - 8 years of relevant Quantity Surveying experience A strong background in building construction, residential development and/or infrastructure projects. Proven experience preparing and managing Bills of Quantities (BOQs). Strong knowledge of construction measurement and valuation. Demonstrable experience in project cost estimation and budgeting. Strong experience monitoring construction expenditure and controlling project costs. Experience in contract administration and contractor payment valuations. Good understanding of construction contracts, variations and change orders. Strong value engineering and cost optimisation skills. Ability to identify cost risks and recommend practical corrective measures. Strong knowledge of construction materials, methods and associated costs. Excellent analytical, numerical and problem-solving abilities. Strong attention to detail and accuracy. Excellent documentation and reporting skills. Ability to work effectively with Project Managers, Engineers, Procurement, Finance, contractors and consultants. High levels of integrity, accountability, commercial awareness and professionalism. KEY PERFORMANCE AREAS The Quantity Surveyor will be measured primarily on:Cost Control - Keeping project expenditure within approved budgets.Budget Accuracy - Accuracy of project estimates, forecasts and cost plans.Quantity Measurement - Accuracy of BOQs, measurements, valuations and quantity records.Contract Administration - Timely and accurate processing of contractor valuations, variations and contract documentation.Value Engineering - Identification and implementation of approved cost optimisation opportunities.Cost Variance Management - Early identification and reduction of project cost variances.Financial Reporting - Timely and accurate submission of project cost reports.Documentation - Accuracy, completeness and proper maintenance of project commercial records.

9 days ago