Hospitality

Runner At Yellowdoor Hotels

YellowDoor Hotels·Abuja, nigeria·Full Time·Contract
HospitalityFull TimeContract
-Closes Sep 25, 2026

Work Arrangement: On-site, rotating shifts (morning, afternoon, and evening)

Compensation: 70,000 - 100,000

Job Overview

YellowDoor Hotels is a boutique hotel in Abuja built for executives and discerning travellers.

The Living Room, our restaurant and bar, runs at a high standard every service. We are hiring Runners who move fast, communicate clearly, and take real pride in getting every dish to the right guest at the right temperature - every time.

Responsibilities

  • Collect plated dishes from the kitchen pass and deliver to correct tables
  • Confirm order accuracy and guest seating before every delivery
  • Communicate promptly with kitchen and floor staff on order readiness
  • Clear tables efficiently to keep service flowing during peak periods - Keep service corridors and stations tidy throughout live service
  • Support wait staff during busy rushes without waiting to be asked

Requirements

  • 1-3 years of experience
  • Clear verbal communication
  • Speed and accuracy under pressure
  • Physical stamina for long shifts
  • Team-player attitude
  • Table layout memorisation
  • Food delivery accuracy
  • Table layout and section memorisation
  • Food and beverage delivery accuracy
  • Menu knowledge
  • Service corridor and station management
  • Kitchen-to-floor communication protocols

Preferred Qualifications

  • Fine-dining service etiquette
  • Ability to assist guests with menu questions or upselling

What the Role Offers

  • Strong Runners at YellowDoor are visible to the Head Waiter and floor leadership.
  • Consistent performers are considered first when Waiter roles open.
  • A fast-moving, boutique floor team that holds itself to a high bar and supports each other through it. Professional and warm, but accountability is real and standards are non-negotiable.

Key skills

Secondary School (SSCE)

At a glance

Company

YellowDoor Hotels

Location

Abuja, nigeria

Employment

Full Time

Experience

Valid until

September 25, 2026

Created

August 27, 2026

More opportunities

Similar roles you might like

Senior Backend Engineer At It Horizons Limited

IT Horizons Limited

Lagos, nigeria

full-time

Job Summary This position is responsible for the design, development, testing, and deployment of software systems that meet customer requirements. The role also involves sitting within the IT team of a business and will be involved in liaising with the Business Analysts and Development Managers to ensure software projects meet requirements. Key Roles & Responsibilities Strong background in PHP and some of its frameworks (Laravel/Lumen particularly) Understanding of the SOLID programming principles Expertise working with packages and other developers' codebases Dedication to TDD Experience designing, integrating, and writing APIs Expertise working with relational databases Experience with modern-day development tools including version control, preprocessors, task runners, etc. Experience with cloud computing architectures Comfortable with Linux servers and some DevOps Desire to work with project managers, designers, and other developers Excellent verbal and time management skills Excellent time management skills and the ability to prioritize projects to meet deadlines Experience working in small cross-functional Agile teams to build complex systems Key Performance Indicators Performance Area Performance Indicator Fix bugs in product and make it more efficient Bug-free application Ensure all projects are delivered within the timeline Delivered software within specified timelines Ensure documentation standards are followed at all times Standard code documentation Resolve all customer support requests within the SLA Good customer rating without escalation to management. Skills & Competencies: The competence proficiency levels required for the position of a Backend Developer are defined using the following key terms. Ability to diagnose and resolve significant, unusual problems and to successfully adapt aspects of an Area of Expertise. Ability to creatively solve significant, complex, non-routine problems in the Area of Expertise. o Ability to adapt practices from other markets or countries for use in the Area of Expertise; and Familiarity with Agile development methodologies Experience with software design and development in a test-driven environment Knowledge of coding languages (e.g. PHP, JavaScript) and frameworks/systems (e.g. Laravel, Vue.js, Git) Experience with databases and Object-Relational Mapping (ORM) frameworks Ability to learn new languages and technologies Excellent communication skills Resourcefulness and troubleshooting aptitude. Competence levels: Awareness: A good understanding of what is involved in an area of expertise and its relevance to the business. Ability to describe the main elements of the area of expertise and their importance to the business; and Ability to recognize how and where competences in expertise are relevant to their own job. Knowledge: Ability to interpret and evaluate information and advice from experts in an area of Expertise. o Knowledge and ability to correctly use the terminology (vocabulary) of the area of Expertise. Ability to hold an informed debate with experts in the Area of Expertise; and ability to ask questions that test the viability of proposals in an Area of Expertise. Skills: Ability to consistently carry out the activities of an area of Expertise to the required standard. Ability to perform the majority of activities of the Area of Expertise. Ability to translate guidelines and standards for the Area of Expertise into practical actions. Ability to solve imaginatively common technical /operational problems in the Area of Expertise, and Ability to guide and advise others in operational /technical aspects of the Area of Expertise. Mastery Ability to generate substantial improvements to local practices and procedures for the Area of Expertise. Organizational relationships: Internal: Reports to: Direct reports; External Relationships Engineering Manager, N/A; Product Manager, Presales Manager, Project team, Clients, vendors Dimensions: Manages and works with direct reports.

7 days ago

Mechanical Technician - Pet Preform Specialist At Prima Corporation Limited (prima)

Prima Corporation Limited (Prima)

All, nigeria

full-time

Position Overview The Mechanical Technician is responsible for installing, troubleshooting, maintaining, and repairing high-speed mechanical systems, injection molding machinery, and advanced industrial packaging equipment. This specialized role focuses on maximizing plant uptime and optimizing production cycles for Husky (125, 400, HPP 4.0) and SACMI IPS 400 systems, alongside crucial auxiliary drying and dehumidification utilities. Core Job Responsibilities Machine Maintenance & Troubleshooting: Execute planned preventative maintenance (PM) schedules on Husky and SACMI IPS 400 injection molding machinery to minimize unscheduled downtime. Diagnostic Mastery: Troubleshoot and isolate root causes of complex mechanical, hydraulic, pneumatic, and servo-driven system failures under tight production deadlines. Advanced Robotics Maintenance: Calibrate, service, and repair high-speed robotic take-out mechanisms, including Husky CoolPik systems and SACMI belt-free linear motor assemblies. Component Overhauls: Disassemble, rebuild, and re-install high-wear components, including hydraulic pumps, proportional valves, high-pressure cylinders, accumulators, and toggle linkages. Mold & Tooling Management: Perform multi-cavity PET mold changes (ranging from 32 to 128+ cavities) and ensure precise mechanical alignment and platen/tie-bar parallelism. Hot Runner Service: Safely clean, inspect, and maintain hot runner manifolds, valve gates, seals, and electrical heater bands to avoid material leakage or thermal degradation. Resin Dryer Optimization: Monitor, calibrate, and maintain resin drying systems to ensure a continuous and stable dew point (targeting down to -40°C) to completely prevent PET hydrolysis. Mold Dehumidifier Control: Manage and maintain auxiliary mold enclosure dehumidification systems to eliminate water condensation ('sweating') on chilled mold faces. Fluid Systems Regulation: Inspect and regulate mold chilled-water loops, verifying proper volumetric flow rates, pressure balances, and leak-free quick-connect interfaces. Safety & Compliance: Enforce and strictly adhere to all workplace safety protocols, including mandatory corporate Lockout/Tagout (LOTO) and active risk mitigation policies. Data Tracking & Logistics: Document all structural modifications, component replacements, and preventative maintenance interventions accurately within the plant's CMMS software. Qualifications & Requirements Education: High school diploma, technical trade apprenticeship, or an Associate degree in Mechanical Engineering Technology. Experience: 2 to 5 years of hands-on experience in high-volume industrial manufacturing, specifically working with PET preform injection molding equipment. Technical Knowledge: Deep proficiency with high-pressure hydraulics, pneumatics, servo-variable pumps, and structural tool mechanics. Auxiliary Expertise: Proven experience managing high-capacity desiccant resin dryers, mold dehumidifiers, and industrial water chillers. Physical Demands Ability to lift heavy mechanical components, climb access ladders, and work efficiently within warm plant environments.

22 days ago

Electrical Technician Injection Molding / Plastics Manufacturing At Prima Corporation Limited (prima)

Prima Corporation Limited (Prima)

Lagos, nigeria

full-time

Job Summary Seeking a skilled Electrical Technician with experience in plastics manufacturing and injection molding machines, preferably Husky and SACMI systems. The candidate will be responsible for troubleshooting, maintaining, repairing, and improving electrical and electronic systems of injection molding machines, auxiliary equipment, and plant utilities to ensure maximum machine uptime, production efficiency, and safety compliance. Key Responsibilities Perform preventive, corrective, and breakdown maintenance on injection molding machines and auxiliary equipment. Troubleshoot electrical, electronic, PLC, servo, and control system faults on molding machines. Maintain and repair hot runner systems, temperature controllers, heaters, thermocouples, servo drives, motors, hydraulic and pneumatic control systems. Diagnose faults in Husky and SACMI injection molding machines and related equipment. Read and interpret electrical drawings, schematics, and control diagrams. Carry out calibration and testing of sensors, instruments, and control devices. Support mold change activities and machine start-up validation. Monitor machine performance and identify opportunities for reliability improvement. Maintain electrical panels, MCCs, circuit breakers, contactors, relays, and VFDs. Assist in installation and commissioning of new machinery and automation systems. Ensure compliance with safety standards, lockout/tagout (LOTO), and electrical regulations. Maintain maintenance records, downtime reports, and spare parts usage. Coordinate with production and process teams to minimize downtime and improve productivity. Required Qualifications Diploma, B. Tech in Electrical Engineering, Mechatronics, Industrial Electronics, or related field. 3 - 7 years of experience in plastics manufacturing or injection molding industry. Hands-on experience with Husky and SACMI injection molding machines preferred. Strong knowledge of PLC systems, industrial automation, servo systems, and electrical troubleshooting. Ability to use electrical testing instruments such as multimeter, clamp meter, megger, and temperature calibrators. Understanding of industrial safety standards and maintenance practices. Preferred Skills: Experience with injection molding machine maintenance, Husky hot runner systems, and SACMI machinery. Knowledge of robotics, automation, and preventive maintenance systems. Knowledge of PLC brands such as Siemens, Beckhoff, Danfoss, and Mitsubishi. Ability to work under pressure and handle emergency breakdowns. Good communication and teamwork skills.

22 days ago

Restaurant Supervisor At Yellowdoor Hotels

YellowDoor Hotels

Abuja, nigeria

full-time

Work Arrangement: On-site, rotating shifts (morning, afternoon, night) Compensation: 150,000 - 250,000 Job Overview YellowDoor Hotels is a boutique hotel in Abuja built for executives and discerning travelers who notice everything. The Living Room, our restaurant and bar, sets the tone. We need a Restaurant Supervisor who runs a tight floor, recovers guest issues before they escalate, and holds a team accountable with precision - shift after shift. Responsibilities Supervise wait staff, runners, and cleaners across rotating morning, afternoon, and night shifts Set and inspect table layouts before the first cover lands each service Monitor floor pace and service quality, correcting staff in real time Handle guest complaints on the spot - calm, fast, and resolved before escalation Coordinate with the kitchen on order timing, special requests, and cross-department issues Conduct pre-service briefings and submit daily operational reports to the F&B Manager Requirements 1-2 years of experience Floor supervision Guest complaint resolution Pre-service briefing Staff accountability Table setup and inspection Service pace management - Formal dining floor management Pre-shift briefing and team readiness Table management and cover pacing Staff performance documentation Kitchen and FOH coordination Preferred Qualifications Experience in a boutique or luxury hotel restaurant Familiarity with formal dining service rhythm and covers Basic incident documentation What the Role Offers Strong performers in this role are considered for senior floor supervisor or Food & Beverage operations leadership as the hotel grows. - Boutique, fast-moving, and high-standard. The team is professional and warm but holds each other accountable. Excellence is expected; excuses are not part of the culture.

a month ago