Manufacturing

Plant Operator

AECI Limited·KwaZulu-Natal, south-africa·Full Time·Onsite
ManufacturingmanagerFull TimeOnsite
-Closes 1 Dec 2026

Purpose of the Job

  • To operate Plant and Equipment in Designated sections in accordance with standards operating procedures.

Key Performance Areas:

Ensure efficient shift handovers:

  • Handover shift by communicating the details of the past shift from incoming operator, ensuring that all information on problem areas are conveyed to operator and Shift leader.
  • Sign and acknowledge all information in handover logbook.
  • Acknowledge all open permit to work clearances.

Establish process start up conditions:

  • Correct commissioning of plant Utilities.
  • Ensure that plant section is safe for start-up.

Ensure the effective commissioning of section or equipment to a specific state:

  • Ensure appropriate documentation is available for batch start up e.g.: works order, process log and manufacturing manual.
  • Test equipment on request.

Ensure Effective communication of process condition:

  • Inform shift leader of process conditions.
  • Communicate in an accurate, concise, clear and prompt manner.
  • Alarms and Deviations are promptly and correctly responded to.
  • Promptly supply concise and complete information to the Shift leader.
  • Communicate accurate and concise information to the laboratory personnel.
  • Communicate accurate and concise information to the engineering department.

Ensure Effective response to abnormal process conditions:

  • Identify changing process conditions and investigate.
  • Seek help from appropriate personnel.
  • Promptly report to Shift team leader and take correct action to solve and contain the problem, with minimizing loss and waste, but done safely.

Ensure effective shut down of process operations:

  • Ensure effective shut down by preparing plant and liaising with relevant personnel.
  • Plant and equipment are correctly and safely isolated according to relevant plant procedures.

Ensure effective administration:

  • Ensure that the hand over logbook is completed accurately.
  • Sign off log sheets and records accurately.
  • Ensure that all open work permits are closed off at end of shift.
  • Efficient control over Utility and raw material usage, to prevent wastage.
  • Create Purchase Orders.
  • Create works order using Syspro.
  • Help Dip tanks for stock take.
  • Perform various calculations.
  • Act for Shift leader in his absence.

SHEQ:

  • Ensure that all safety standards are maintained.
  • Test and checks on all safety equipment carried out by ensuring PMS are completed in the specified time frame.
  • Rectify and report safety hazards promptly.
  • Ensure that all team members are using the correct PPE.
  • Attend safety meeting and complete plant safety inspections monthly.
  • Attend permit to work meeting.
  • Assist in incident investigations.
  • Maintain good housekeeping standards on the plant.
  • Unsafe conditions reported and rectified e.g. spillages.
  • Correct storage of equipment and stock.

Staff Management:

  • Carry out PJOs on Junior Operators, identify areas that require attention.
  • Assist the production manager in updating manufacturing manuals and process logs.
  • Ensure Effective communication within the production team.
  • Assist in the Training of Junior operators and students.

Education, Knowledge and Skill Requirements

  • Grade 12 with Mathematics and Science
  • Minimum 2/3 years' experience in a chemical plant.
  • Minimum qualification, NQF3 or Chemical Eng. Dip.

Behavioural Competencies

  • Leadership
  • Excellent communication skills
  • Excellent Work Ethic, Teamwork.
  • Flexible and integrity.
  • Diligent and Able to work under stress conditions.
  • Attention to detail.
  • Motivated and committed.
  • Problem solving.

Date Closing: Nov 24, 2026

Key skills

Matric

At a glance

Company

AECI Limited

Location

KwaZulu-Natal, south-africa

Employment

Full Time

Experience

manager

Valid until

December 1, 2026

Created

November 18, 2026

More opportunities

Similar roles you might like

Plant Supervisor

Phakisa Holdings

Johannesburg, Gauteng, south-africa

FULL_TIME

Plant Supervisor Location: JHB - Nigel, Gauteng Type: Contractor Reports to: Operations Purpose of the Job: This position will be for working in and maintaining a solvent distillation plant on behalf of a client. The supervisor will be expected to work closely with the technical maintenance and operation team. JOB REQUIREMENTS QUALIFICATIONS Grade 12 Essential Relevant tertiary education; Diploma /Degree in Engineering, management or automation process Essential EXPERIENCE Plant Operations: Minimum 10 years in petrochemical/chemical processing with at least 5 years in a distillation plant environment. Overseeing continuous distillation processes, monitoring critical operating parameters and optimizing production efficiency>10 Years Essential Supervisory Experience: 5+ years leading shift teams or plant operators, with proven ability to enforce process safety, HSE, and compliance standard>10 Years Essential Process Control Systems: Hands-on experience with SCADA and PLC systems, with the ability to interpret trends, alarms, and interlocks >10 Years Essential Computer Systems: Strong computer literacy (MS Office) >10 Years Essential Process Safety Management: >10 Years Essential Demonstrated knowledge of PSM frameworks (e.g. OSHA Act) and application in daily operations. Shutdown Experience: Exposure to planned maintenance turnarounds and unplanned shutdowns, including coordination with maintenance and engineering >10 Years Essential Continuous Improvement: Experience implementing Lean/Six Sigma, root cause analysis, and loss prevention systems >10 Years Essential COMPETENCIES REQUIRED Hard Skills Plant Operations: Experienced in production and operation and proficient in manufacturing principles particularly in distillation plant. Compliance & Regulatory Adherence: Demonstrate excellent attention to detail and a strong commitment to HSE policies, procedures and efficiency and follow strict regulations as per the OSH act. Equipment & Machinery: Skilled in operating and maintaining production machinery, adhering to quality standards, and achieving production targets. Process Analysis: Working in the control room and the plant, performing routine checks, monitoring plant systems and processes. Equipment Adjustment and Control: Ensure the safe operation of processes by adjusting system settings and responding to alarms. Performance Monitoring: Monitor instruments, gauges, and alarms to ensure optimal performance. Troubleshooting and Problem Resolution Adjust valves, pumps, and equipment as needed. Perform troubleshooting to resolve process issues. Communication and Coordination: Coordinate with other departmental staff. Soft Skills Leadership under pressure - ability to make confident decisions during plant upsets or emergencies. Situational awareness - anticipating risks and responding proactively. Coaching & mentoring - building operator competence through structured training. Cross-functional collaboration - working closely with maintenance, engineering, and HSE teams. Change management - leading continuous improvement and adapting teams to new processes. Resilience - maintaining composure and performance in high-stress, 24/7 plant environments Integrity - Consistently demonstrates honesty, accountability, and ethical decision-making Adaptability - Adjusts effectively to changing priorities, operational demands, and fast-paced environments. Collaboration - Works seamlessly with cross-functional teams to achieve shared goals and operational excellence. Effective Communication - Communicates clearly and confidently, ensuring alignment and understanding across all levels. Effective Time Management - Prioritizes tasks efficiently to meet deadlines and operational targets

3 days ago

Internal Sales Administrator

Green Marble Recruitment

Gauteng, south-africa

full-time

ROLE OVERVIEW: Supervise internal orders and sales activities, ensuring accurate quotations, pricing, order capturing and scheduling. The role focuses on customer relationships, efficient resource utilisation, staff performance and compliance with company procedures. Minimum requirements: Grade 12 / Matric. A relevant tertiary qualification and/or qualification in concrete technology will be an advantage. 3 - 5 years' experience in a similar role involving customer liaison, sales administration or order scheduling. Tenders experience. Technical background. Computer literacy, including Microsoft Office, Outlook, Excel and Word. Strong written and verbal communication skills in English. Sound interpersonal, organisational and administrative skills. Ability to work under pressure and as part of a team. Willingness and ability to work irregular and extended hours. Duties and responsibilities: Price products offered by the company to customers. Ensure scheduling complies with company standards. Prepare accurate sales quotations for customers. Price tenders with assistance from technical staff where required. Take orders for concrete and pumps and schedule them on the computer to ensure on-time delivery. Administer payments from cash customers before product delivery. Allocate zones correctly to ensure accurate transporter payments. Ensure all daily orders are available in advance for loading at the concrete batch plants. Ensure optimal utilisation of truck mixers through effective order scheduling. Liaise with customers, suppliers, concrete batch plant operators, area managers, operations managers and plant managers. Maintain positive relationships between customers and the company. Address and resolve customer queries and problems. Follow up on quotations and tenders daily with sales staff, customers and the general marketplace. Place cement orders for concrete batch plants and communicate delivery times to plant staff. Record staff working hours, including normal hours, overtime and leave. Manage staff performance and development. Ensure compliance with company procedures and quality standards relating to customer relationships, pricing, quotations, orders and scheduling. Apply relevant human resources policies and procedures relating to recruitment, training and development, performance management, disciplinary matters and grievances.

13 days ago

Procedure Consultant Chemical Engineer

Network Recruitment

Pretoria, Gauteng, south-africa

FULL_TIME

An exciting opportunity exists for an experienced Chemical Engineer to join a dynamic engineering and consulting environment as a Process / Procedure Consultant. The successful candidate will be responsible for developing, reviewing and optimising operational procedures, process documentation and engineering standards within industrial and chemical processing environments. The role requires strong chemical engineering knowledge, process understanding and the ability to translate complex technical requirements into practical, safe and effective operating procedures. Key Responsibilities Develop, review and maintain standard operating procedures (SOPs), work instructions and technical documentation. Analyse existing chemical and industrial processes to identify opportunities for improvement and optimisation. Develop and update process descriptions, operating philosophies and process control procedures. Conduct process assessments, technical reviews and operational risk evaluations. Ensure procedures comply with relevant legislation, industry standards, safety regulations and environmental requirements. Collaborate with multidisciplinary engineering teams, plant operators, maintenance personnel and management. Provide technical consulting and recommendations on process improvements and operational efficiency. Assist with process troubleshooting, root cause investigations and corrective action implementation. Review process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs) and engineering specifications. Develop process safety documentation, including risk assessments, HAZOP studies and operating guidelines. Support commissioning, plant start-up and operational readiness activities where required. Facilitate procedure implementation, training and continuous improvement initiatives. Ensure accurate document control, revision management and technical recordkeeping. Minimum Requirements BEng / BSc in Chemical Engineering. Relevant experience in chemical, process or industrial engineering environments. Experience developing and reviewing technical procedures, operating manuals and engineering documentation. Strong understanding of chemical processes, process engineering principles and plant operations. Ability to interpret PFDs, P&IDs and technical specifications. Knowledge of process safety, risk management and relevant industry standards. Excellent technical writing, analytical and problem-solving skills. Strong communication and stakeholder engagement abilities. Advantageous Experience Experience within petrochemical, oil and gas, mining, minerals processing, manufacturing or chemical processing industries. Exposure to EPC, EPCM or engineering consulting environments. Experience with HAZOP, HAZID, process safety management and risk assessments. Knowledge of process optimisation, plant commissioning and operational readiness. Registration with ECSA or progress towards professional registration.

14 days ago

Workshop Manager - Diesel Mechanics & Yellow Plant

People Dimension

Benoni, south-africa

FULL_TIME

Introduction We are seeking an experienced and technically strong Workshop Manager with an extensive background in diesel mechanics, yellow plant and heavy earthmoving equipment within the civil construction or mining industry. The successful candidate will be responsible for managing the workshop and overseeing the maintenance, servicing, diagnostics and repairs of the company's plant and equipment fleet. This is a senior position requiring a strong technical foundation, proven leadership ability and a practical understanding of the demands of operating heavy equipment in a production-driven environment. The ideal candidate will have approximately 10 years of relevant industry experience and the ability to improve equipment reliability, minimise downtime, control maintenance costs and ensure that all machinery is maintained to the required safety and operational standards Duties & Responsibilities 1. Workshop Management Manage and oversee the daily operations of the workshop. Supervise, lead and allocate work to diesel mechanics, artisans, technicians and other workshop personnel. Ensure all maintenance and repair work is completed efficiently and to the required quality standards. Monitor staff performance, productivity and adherence to workshop procedures. 2. Yellow Plant & Fleet Maintenance Oversee the servicing, maintenance, inspection and repair of yellow plant and heavy earthmoving equipment. Develop and implement preventative and planned maintenance programmes. Coordinate breakdown repairs and ensure equipment is returned to service as quickly and safely as possible. Monitor equipment condition, reliability, availability and recurring mechanical failures. Ensure accurate maintenance records, service histories and machine-hour tracking. 3. Technical Oversight Provide technical guidance on complex mechanical faults and equipment failures. Ensure effective fault diagnosis and root-cause analysis to prevent recurring breakdowns. Oversee major repairs, component replacements and equipment refurbishments. Ensure repairs are completed in accordance with applicable manufacturer specifications and maintenance standards. 4. Cost Control & Procurement Manage workshop expenditure and maintenance costs within approved budgets. Monitor spare parts, tools, consumables and inventory levels. Coordinate the procurement of parts and services. Identify opportunities to reduce equipment downtime, unnecessary expenditure and repeat repairs. Report on maintenance costs, equipment performance and anticipated repair requirements. 5. Safety & Compliance Ensure compliance with applicable occupational health and safety legislation and site-specific safety requirements. Maintain a safe, clean and organised workshop environment. Ensure equipment inspections, maintenance records and relevant compliance documentation are up to date. Promote safe working practices and ensure workshop personnel follow established procedures. 6. Operational Coordination Work closely with site management, plant operators and project teams to prioritise equipment maintenance. Ensure plant availability supports construction and mining production schedules. Provide regular reports on fleet condition, breakdowns, maintenance activities and equipment availability. Identify equipment requiring major repairs, replacement or refurbishment. Desired Experience & Qualification Minimum Requirements Approximately 10 years' relevant experience in diesel mechanics, yellow plant, heavy earthmoving equipment or plant maintenance within the civil construction or mining industry. Trade-tested Diesel Mechanic qualification (Red Seal) or a recognised relevant heavy equipment mechanical trade qualification. Proven experience working with and maintaining yellow plant and heavy earthmoving equipment. Previous experience in a Workshop Manager, Workshop Foreman, Maintenance Supervisor or similar leadership role. Strong technical knowledge of diesel engines, mechanical systems, hydraulics, transmissions and fault-finding. Experience managing workshop personnel, allocating work and monitoring productivity. Strong knowledge of preventative maintenance, planned servicing, breakdown repairs and maintenance scheduling. Experience with maintenance budgets, parts procurement, stock control and cost management. Good computer literacy and the ability to maintain accurate workshop records and reports. A valid driver's licence. Sound knowledge of occupational health and safety requirements and safe workshop practices. Skills & Competencies Strong diesel mechanical and heavy equipment knowledge. Proven leadership and people-management skills. Excellent fault-finding and problem-solving ability. Strong planning, scheduling and organisational skills. Good financial awareness and cost-control capabilities. Ability to work under pressure and manage competing priorities. Strong communication and reporting skills. A proactive approach to preventative maintenance and continuous improvement.

24 days ago