Key Requirements:
Please use the job title as the subject line of your email.
Company
Nasom Limited
Location
Delta, nigeria
Employment
Full Time
Work style
Onsite
Experience
Valid until
October 13, 2026
Created
October 8, 2026
WTS Energy
Rivers, nigeria
Line Manager: Mooring Master (MM) Job Summary Assisting MM during export operations. AMM shall ensure that operation is executed in accordance with international marine rules, OCIMF recommendations and good seaman ship practice. Ensure that all required permits were obtained, to connect and disconnect export hose. Shall ensure the operation is planned and executed with good workmanship and in accordance with approved work procedures. Ensure that mooring system and export hose areas are as per required standard and in good condition. Key Responsibilities During Tanker Mooring / Unmooring Operations: Assist and provide guidance to tanker crew on the appropriate locations for tugboat connection bollards, and coordinate tugboat cast-off under instruction of Mooring Master. Continuously monitor the tanker's position, heading, and speed relative to the FPSO and keep Mooring Master informed. Assist and provide guidance to tanker crew during hawser connection and disconnection, ensuring a safe operation. Export Hose Connection / Disconnection: Assist and provide guidance to tanker crew on hose connection / disconnection using dedicated offload toolbox equipment. During Station Keeping and Offloading: Continuously monitor the relative position, heading, and movement of the tanker with regards to FPSO. Monitor hawser tension and environmental conditions, including wind, waves, current, and visibility, and inform the MM if there is any doubt. Limits are set in the Terminal Handbook. Maintain a continuous watch on the bridge and coordinate the use of tugboats to maintain tankers within established operating limits. Maintain close communication with Mooring Master, tanker crew, tugboats, and relevant FPSO personnel throughout the operation. Immediately inform Mooring Master of any abnormal movement, excessive mooring loads, deterioration in weather conditions, equipment malfunction, or other unsafe conditions. Requirements Certificates Training: Chief Mate Certificate, STCW95 - Reg. II/2 and flag state endorsement of recognition. For other certificates and training, see Company Training Matrix, Unit Specific Training Matrix and CBT Matrix. Have completed approved education and training and meet the standard of competence specified in section A-II/2 of the STCW code for master and chief mates on ships of 3000 gross tonnage or more. Excellent command in English written and spoken. Professional Qualifications: Meet requirements for certification as an officer in charge of a navigational watch on ships of 500 gross tonnage and have at least 12 months approved seagoing service in that capacity. Familiarity with Colregs and knowledge of SBM and tandems operations is necessary. The ideal candidate should have good knowledge of Bridge management and ECDIS.
22 days ago
Job Summary Assisting MM during export operations AMM shall ensure that operation is executed in accordance with international marine rules, OCIMF recommendations, Gabonese Government rules and good seaman ship practice Ensure that all required permits were obtained, to connect and disconnect export hose Shall ensure the operation is planned and executed with good workmanship and in accordance with approved work procedures Ensure that mooring system and export hose areas are as per required standard and in good condition. Key Responsibilties General Responsibilities: Assisting tanker crew during tandem mooring and unmooring Assisting tanker crew while handling tugboat's towlines Assisting tanker crew while connecting and disconnecting export hose Backup for MM on tanker bridge during loading operation Monitoring loading, weather condition, handling tugboats or other boats involved in operation, monitoring hawser tension and configuration, cargo loading rate and loading performance Maintains communication with tugboats, tanker personnel and FPSO Routine control of towing lines, export hose and mooring hawser during loading Assisting Master of export tanker while waiting for cargo documents Signing for receipt (only) letter of protest and statement of facts. (Not to sign any cargo documents and ullage reports) Responsible for export hose toolbox and accessories of tanker rail hose Be familiar with the PTW system. Professional Qualifications Meet requirements for certification as an officer in charge of a navigational watch on ships of 500 gross tonnage and have at least 12 months approved seagoing service in that capacity. Familiarity with Colregs and knowledge of SBM and tandems operations is necessary The ideal candidate should have good knowledge of Bridge management and ECDIS. Certificates Training: Chief Mate Certificate, STCW95 - Reg. II/2 and flag state endorsement of recognition For other certificates and training, see Company Training Matrix, Unit Specific Training Matrix and CBT Matrix Have completed approved education and training and meet the standard of competence specified in section A-II/2 of the STCW code for master and chief mates on ships of 3000 gross tonnage or more. Excellent command in English written and spoken.
2 months ago
HRD Solutions
Lagos, nigeria
Job Summary We are seeking an experienced and disciplined Boatswain (Bosun) to supervise deck crew operations and ensure safe, efficient vessel maintenance. The ideal candidate will provide leadership to Able Seamen and deckhands while maintaining compliance with maritime safety standards. Key Responsibilities Supervise and coordinate daily deck operations Assign tasks to Able Seamen and deck crew Oversee vessel maintenance, painting, cleaning, and repairs Ensure proper mooring, anchoring, and cargo handling operations Enforce safety procedures and use of PPE onboard Maintain deck equipment, ropes, winches, and safety gear Assist Chief Mate in implementing work schedules Ensure compliance with STCW and maritime safety regulations Requirements Valid STCW certification Minimum of 4 - 6 years' experience in maritime operations Previous experience as Able Seaman or senior deck crew Strong leadership and supervisory skills Knowledge of vessel maintenance and safety standards Ability to work offshore on rotational schedule Competencies Strong communication and teamwork skills High level of discipline and safety awareness Problem-solving and decision-making ability Physical fitness for deck operations
Job Summary The Project Safety Officer on an FPSO is responsible for ensuring the implementation, enforcement, and continuous improvement of health, safety, and environmental (HSE) standards during offshore operations. The role is critical in minimizing risks to personnel, the environment, and equipment during project activities, including construction, commissioning, maintenance, or decommissioning phases on the FPSO. Key Responsibilities General Responsibilities: Responsible for all safety and environmental issues on-board SAFO has ultimate authority, as delegated by OIM, to halt any maintenance job that breaches established safety limits, irrespective of if under PTW or routine procedure, and if permanent crew, Client or subcontractors involved. Act as Assistant Mooring on-board export tankers. May act as HLO as required. Special Responsibilities: To be familiar with rules, regulations and work procedures applicable to the task to be executed. Manage Permit to Work system on the unit Monitors condition and ensures maintenance of all safety equipment Organises and convenes safety meetings, safety committee meetings, accident prevention committee meetings and prepares minutes of meeting Monitors waste and hazardous material management systems on-board Manage oil and chemical spill clean-up equipment Manage pollution response Monitor all on-board equipment, systems and procedures to reduce risks for pollution Manages on-board training system and safety drills, including debriefing Manages safety reporting system on the unit Monitor all gas and oxygen-measuring equipment is well maintained and calibrated as per manufactures instruction and that personal assigned to use the equipment are fully trained and supervised Be familiar with H2S hazards and monitor H2S content Upgrade safe work procedures on board as deemed necessary Ensure that personnel executing hazardous work are trained and fully informed of the work procedures and/or quality plans and that they are complied with Monitors crane operations Delegated authority from OIM to ensure that only certified and tested cargo gears in best and approved working order are used for lifting and personnel transport. Monitor that boat traffic and supply boat operations are well controlled, carried out efficiently and safely Manage export hose connection/disconnection on export tanker Manage Mooring Hawsers connection/disconnection on export tanker Monitor crew lists, and other documentation related to FPSO people movement Liaise with OIM regarding the unit's security plan. Certificates Training: Chief Mate Certificate - STCW95 Reg. II/2 and flag state endorsement of recognition. (The ideal candidate must have this certificate). Professional Qualifications Meet requirements for certification as an officer in charge of a navigational watch on ships of 500 gross tonnage or more and have at least 12 months approved seagoing service in that capacity. Have completed approved education and training and meet the standard of competence specified in section A-II/2 of the STCW code for chief mates on ships of 3000 gross tonnage or more. Excellent command in English written and spoken
3 months ago