Line Manager: Mooring Master (MM)
- Assisting MM during export operations.
- AMM shall ensure that operation is executed in accordance with international marine rules, OCIMF recommendations and good seaman ship practice.
- Ensure that all required permits were obtained, to connect and disconnect export hose.
- Shall ensure the operation is planned and executed with good workmanship and in accordance with approved work procedures.
- Ensure that mooring system and export hose areas are as per required standard and in good condition.
Key Responsibilities
During Tanker Mooring / Unmooring Operations:
- Assist and provide guidance to tanker crew on the appropriate locations for tugboat connection bollards, and coordinate tugboat cast-off under instruction of Mooring Master.
- Continuously monitor the tanker's position, heading, and speed relative to the FPSO and keep Mooring Master informed.
- Assist and provide guidance to tanker crew during hawser connection and disconnection, ensuring a safe operation.
Export Hose Connection / Disconnection:
- Assist and provide guidance to tanker crew on hose connection / disconnection using dedicated offload toolbox equipment.
During Station Keeping and Offloading:
- Continuously monitor the relative position, heading, and movement of the tanker with regards to FPSO.
- Monitor hawser tension and environmental conditions, including wind, waves, current, and visibility, and inform the MM if there is any doubt. Limits are set in the Terminal Handbook.
- Maintain a continuous watch on the bridge and coordinate the use of tugboats to maintain tankers within established operating limits.
- Maintain close communication with Mooring Master, tanker crew, tugboats, and relevant FPSO personnel throughout the operation.
- Immediately inform Mooring Master of any abnormal movement, excessive mooring loads, deterioration in weather conditions, equipment malfunction, or other unsafe conditions.
Requirements
Certificates Training:
- Chief Mate Certificate, STCW95 - Reg. II/2 and flag state endorsement of recognition.
- For other certificates and training, see Company Training Matrix, Unit Specific Training Matrix and CBT Matrix.
- Have completed approved education and training and meet the standard of competence specified in section A-II/2 of the STCW code for master and chief mates on ships of 3000 gross tonnage or more.
- Excellent command in English written and spoken.
Professional Qualifications:
- Meet requirements for certification as an officer in charge of a navigational watch on ships of 500 gross tonnage and have at least 12 months approved seagoing service in that capacity.
- Familiarity with Colregs and knowledge of SBM and tandems operations is necessary.
- The ideal candidate should have good knowledge of Bridge management and ECDIS.