Manufacturing

Production Supervisor

Cosmos Limited·Nairobi, kenya·Full Time·Onsite
ManufacturingFull TimeOnsite
-Closes Oct 21, 2026

Job Summary

The Production Supervisor is responsible for enforcing cGMP compliance on the production shop floor through GMP rounds, documentation review, and adherence to approved procedures. The role oversees production operations, manpower planning, batch documentation and release, while ensuring production targets, quality standards, and operational efficiency are achieved.

Key Responsibilities

  • Ensure compliance with cGMP, SOPs, safety, and quality standards.
  • Supervise material receipt, verification, and packing activities.
  • Review production reports and batch manufacturing records.
  • Perform reconciliation and ensure accurate documentation.
  • Coordinate manpower, machines, and materials to meet production targets.
  • Follow up on machine breakdowns and maintenance activities.
  • Review and update SOPs.
  • Supervise staff performance, training, and discipline.
  • Support audits, inspections, and Health & Safety compliance.
  • Raise deviations and change controls where necessary.

Key Outputs

  • Compliance with cGMP and quality standards.
  • Accurate and timely production documentation and batch release.
  • Achievement of production and efficiency targets.
  • High-performing and well-managed team.
  • Updated and compliant SOPs and records.

Competencies

  • Understanding of manufacturing processes and cGMP requirements.
  • Strong leadership and people management skills.
  • Attention to detail and problem-solving ability.
  • Good communication and organizational skills.
  • Computer literacy in MS Office applications.

Qualifications

  • Minimum Degree / Diploma in Pharmacy, Engineering, or related field.
  • Minimum 5 years' experience in manufacturing/packaging operations.
  • At least 2 years in a supervisory role.
  • Strong understanding of cGMP and Quality Management Systems.

Key skills

BA/BSc/HNDDiploma
Apply Now
Send your CV along with a cover letter torecruitment@cosmos-pharm.com

Please use the job title as the subject line of your email.

At a glance

Company

Cosmos Limited

Location

Nairobi, kenya

Employment

Full Time

Work style

Onsite

Experience

Valid until

October 21, 2026

Created

October 15, 2026

More opportunities

Similar roles you might like

Qssk-machine Operator-powder Plant

Q-Sourcing Servtec Group

Kisii, kenya

full-time

Job Summary: The overall purpose of the job is to operate the plant's powder machinery, ensure the machine runs smoothly, monitor the production of milk powder and ensure that production targets and quality is met by following the production plan and schedule. Key duties and responsibilities: Review the daily production plans and assess all material requirements with the Production In-Charge; Execute actual production on assigned production lines; Attend production shift meetings led by the Production In-Charge Co-ordinate with Production Supervisors on production in regards to availability of labor during shifts; Monitor and report on production work in process, production efficiency, consumption, scrapping, waste, and all key production metrics and effectively implement corrective action for variances Continuously check powder plant machinery and gather information about the functioning and maintenance requirement before the start of a new shift; Oversee duties performed by the packers and offer the necessary assistance; Implement all relevant food safety standards in the section; Monitor and record all applicable Critical Control Points (CCPs) Operational Prerequisite Programme (OPRPs), and Prerequisite Programme (PRPs) in the section; Prepare and provide feedback to the Production Manager on process improvement ideas and support in the implementation of continuous improvement activities to optimize results and improve productivity; Report on incidents, accidents, and non-conformity observations during a production shift; Ensure strict observation of standard operating procedures for production, operational, health, safety, and environment standards; Ensure that production line workers adhere to the company's Environment, Health and Safety (EHS) standards and procedures including reporting of accidents or deliberate non-compliance of the same; Attend morning briefs of the production team; Attend and complete all assigned training provided periodically; and Perform any other duties as may be assigned by the Production Supervisor. Knowledge, experience and qualifications: Diploma in mechanical engineering/engineering from a recognized institution Minimum of 2 years' experience in dry milk powder production Technical & Behavioural competencies Knowledge of machine operations Knowledge of dry milk powder production Analytical skills Manpower planning and management skill Working knowledge of GMP requirements for food and dairy products and ensuring that UHT facilities and processes conform to GMP Standards. Familiar with Dairy Develop Authority's (DDA) regulations, Dairy Industry Act, standards set by the Kenya Bureau of Standards (KBS) and other relevant regulatory requirements that apply to Dairy production in Uganda. Effective communication skills Strong interpersonal skills and patience Ability to multi-task Good time management Ability to work as a team Analytical thinking and problem-solving skills Organization and strong attention to detail

3 days ago

Qssk- Forklift Operator

Q-Sourcing Servtec Group

Machakos, kenya

full-time

Job Summary: The Forklift Operator is responsible for the safe and efficient operation of forklifts to support inbound, outbound, and production material movements. This role ensures all equipment is inspected and maintained, shipments are accurate and damage-free, and materials are transferred in strict coordination with supervisors and production teams to meet site safety and quality requirements. Key Duties and Responsibilities: Carry out pre-use inspections of forklifts and duly update the forklift maintenance and inspection record. Operate forklifts as per site safety protocols and assigned operational requirements. Ensure forklifts are kept clean and free from oil leaks at all times. Verify that inbound and outbound shipments are accurate and free from damage; report any damage immediately. Actively communicate with supervisors and operators to effectively handle materials during transfer. Load and unload products and materials within designated areas, including production lines and warehouses, as assigned. Move the correct materials to the production team as guided by the Production Supervisor/Manager. Qualifications Diploma/ Certificate in Plant Operation or a higher qualification. Experience Minimum 2 years of proven experience as a forklift operator in a manufacturing, warehouse, or logistics environment. Skills Strong understanding of forklift maintenance and pre-use inspection procedures. Excellent attention to detail for shipment accuracy and damage detection. Ability to remain calm and follow safety procedures under pressure. Good communication skills to coordinate with supervisors, production teams, and operators. Proven ability to multitask and prioritize material movements to meet production targets. Basic problem-solving skills to identify equipment or material issues early

7 days ago

Production Manager

Bollard Consulting Limited

Thika, kenya

full-time

The role fosters a lean, hands-on, entrepreneurial mindset driven by ownership, data-backed execution, transparency, and high performance. The Production Manager will take full operational ownership of factory floor production during facility commissioning and full-scale commercial operations. This role ensures maximum yield, cost efficiency, daily output, and continuous adherence to international food safety and quality standards. Key Roles & Responsibilities Production Planning & Execution Lead daily factory operations, shift scheduling, machine utilization, and frontline workforce deployment to meet daily production targets. Monitor and optimize key performance indicators (KPIs), including yield or recovery rates, WIP tracking, downtime reduction, waste minimization, and production cost per kilogram. Establish structured daily shift handovers and submit disciplined operational reports to executive leadership. Quality, Food Safety & Compliance Enforce Good Manufacturing Practices (GMP), HACCP standards, sanitation, traceability, and foreign-matter or segregation controls across all processing lines. Collaborate closely with Quality Assurance to prepare the plant for upcoming BRCGS certification within three months of operational launch. Team Leadership & Operational Management Directly manage the Assistant Production Manager, Production Supervisors, Line Leaders, Machine or Dryer Operators, Maintenance team, Packing Teams, and seasonal casual labor. Foster a culture of discipline, accountability, safe work practices, and high productivity on the factory floor. Coordinate cross-functionally with Sourcing, Warehouse or Stores, Maintenance, HR, and Finance teams to ensure seamless factory operations. Key Requirements & Qualifications Degree or Diploma in Food Science or Technology, Production Engineering, Industrial Engineering, Mechanical Engineering, or a related field. Minimum 5 years of progressive production experience within food or agro-processing manufacturing, including at least 3 years directly managing shifts and frontline teams. Hands-on experience in dried fruit, fresh-produce packhouses, juice or pulp, canning, dairy, beverages, or snacks is required. Strong practical knowledge of GMP, HACCP, and foreign-matter controls within BRCGS, FSSC 22000, or ISO 22000 operating environments. Demonstrable track record of managing yield, waste, equipment utilization, and labor productivity using structured daily KPI data. Business fluency in spoken and written English and Kiswahili. Must reside within or be willing to relocate to Thika, with full availability for shift-based schedules, weekend coverage, and extended hours during peak mango season and plant commissioning.

21 days ago

Operator – Coater

Safal Group

Kenya, kenya

Full-Time

The company opened its first manufacturing facility in Mombasa, Kenya, in 1962, rapidly widening its reach to include further countries in East Africa, and then Southern Africa. In 2003, all operating companies were reversed into the current holding company called Safal Investments Mauritius Limited and conduct its business across Africa as the Safal Grou Operator – Coater Description Key responsibilities: Inspect pick-up and applicator rolls to avoid production of painted coils with defects originating from coater rooms. Inspect incoming coils to avoid damages on applicator rolls. Clean chemical and paint coaters. Identify the correct paint according to operation requirements or as requested by line supervisor. Check paint properties and liaise with Quality Inspectors for correction if necessary. Ensure timely readiness of the chemical and paint solution after stoppages and during program changes. Ensuring there is sufficient paint in the tray and that paint is recirculating as required. Remove empty paint drums from the coater rooms and disposal of used cotton rags and thinner in accordance to disposal procedure. Preparation of chemical & paint coater. Ensure paint application in accordance with operation parameters with the right WFT, DFT. Liaise with the Quality Inspector for results and roll adjustment. Inspect coating progress and correct defects. Operate the control desk at the coater room according to the procedure. Feed the process parameters into the SCADA as required. Report all faults as pertaining to Coaters section or any other section of the line. Ensure the material is pre-treated using the recommended procedure before paint is applied. Maintain high standards of housekeeping at coaters section. Fill in the operation parameters as specified in the coater room logbook. Participate in strip breakage recovery. Participate in line start-up and shut-down activities. Train on Entry and Exit sections as may be required for multi-skilling. Conduct additional activities as may be assigned by CCL Production Supervisor. Adhere to health and safety guidelines, safe work practice and good housekeeping (Wear provided PPEs at all times). Have a keen observation to CO2 fire suppression system and respond as per emergency plan put in place. Requirements Qualifications required: KCSE Certificate. Government grade test II or Craft Certificate in mechanical, electrical or paint process exposure Minimum 3 years’ experience operating industrial process or production equipment in a manufacturing or heavy industrial environment. Minimum 1 year’s experience operating oil circulation, filtration, cooling, lubrication, hydraulic, or similar industrial fluid-handling systems. Key competencies and skills: No medical conditions e.g. not allergic to paints Safety conscious. Ability to learn quickly. Team player. Flexible and willing to work as instructed. Able to communicate appropriately. Don't Keep Share!: WhatsApp Tweet

a month ago

Operator - Coater

Safal Group

Kilifi, kenya

full-time

Description Key responsibilities: Inspect pick-up and applicator rolls to avoid production of painted coils with defects originating from coater rooms. Inspect incoming coils to avoid damages on applicator rolls. Clean chemical and paint coaters. Identify the correct paint according to operation requirements or as requested by line supervisor. Check paint properties and liaise with Quality Inspectors for correction if necessary. Ensure timely readiness of the chemical and paint solution after stoppages and during program changes. Ensuring there is sufficient paint in the tray and that paint is recirculating as required. Remove empty paint drums from the coater rooms and disposal of used cotton rags and thinner in accordance to disposal procedure. Preparation of chemical & paint coater. Ensure paint application in accordance with operation parameters with the right WFT, DFT. Liaise with the Quality Inspector for results and roll adjustment. Inspect coating progress and correct defects. Operate the control desk at the coater room according to the procedure. Feed the process parameters into the SCADA as required. Report all faults as pertaining to Coaters section or any other section of the line. Ensure the material is pre-treated using the recommended procedure before paint is applied. Maintain high standards of housekeeping at coaters section. Fill in the operation parameters as specified in the coater room logbook. Participate in strip breakage recovery. Participate in line start-up and shut-down activities. Train on Entry and Exit sections as may be required for multi-skilling. Conduct additional activities as may be assigned by CCL Production Supervisor. Adhere to health and safety guidelines, safe work practice and good housekeeping (Wear provided PPEs at all times). Have a keen observation to CO2 fire suppression system and respond as per emergency plan put in place. Requirements Qualifications required: KCSE Certificate. Government grade test II or Craft Certificate in mechanical, electrical or paint process exposure Minimum 3 years' experience operating industrial process or production equipment in a manufacturing or heavy industrial environment. Minimum 1 year's experience operating oil circulation, filtration, cooling, lubrication, hydraulic, or similar industrial fluid-handling systems. Key competencies and skills: No medical conditions e.g. not allergic to paints Safety conscious. Ability to learn quickly. Team player. Flexible and willing to work as instructed. Able to communicate appropriately.

a month ago

Production/melt Shop Operators

Accurex Leadership and Management Consultants Ltd

Nairobi, kenya

full-time

Job Role The Furnace / Melt Shop Operator is responsible for supporting the safe and efficient operation of furnace and melt shop processes involved in the production of molten metal. The role involves preparing and handling raw materials, supporting furnace charging and melting operations, monitoring production processes, maintaining cleanliness and order within the work area, and following established safety and quality procedures. PURPOSE OF THE ROLE Support safe and efficient furnace and melt shop operations. Ensure raw materials are properly prepared and handled for production. Assist in maintaining consistent production flow and process efficiency. Monitor operating conditions and promptly report abnormalities or unsafe conditions. Maintain cleanliness, order, and safe working conditions within the melt shop. Support production targets while maintaining required quality and safety standards. Ensure compliance with company operating procedures, health and safety requirements, and production guidelines. DUTIES AND RESPONSIBILITIES Furnace & Melting Operations Operate and support furnace equipment in accordance with established operating procedures. Assist with furnace charging and feeding of approved raw materials. Monitor furnace operating conditions and report unusual conditions to the supervisor. Support melting operations to ensure smooth and continuous production. Assist with tapping and transfer of molten metal as directed by authorized personnel. Follow prescribed operating parameters and production instructions. Raw Material Handling & Preparation Receive, sort, prepare, and handle raw materials required for melting operations. Ensure materials are correctly identified and prepared before charging. Assist in handling scrap metal and other approved furnace inputs. Report contaminated, unsuitable, or incorrectly identified materials to the supervisor. Maintain proper organization of materials within designated areas. Process Monitoring & Production Support Monitor production activities and assist in identifying process abnormalities. Record or communicate relevant production information as required. Support production teams in achieving daily output targets. Coordinate with other melt shop personnel to maintain smooth production flow. Assist with routine operational checks and inspections. Immediately escalate equipment faults, production issues, spills, or unsafe conditions. Safety & Compliance Strictly follow all health, safety, and environmental procedures. Wear and correctly use all required Personal Protective Equipment (PPE). Maintain safe distances and follow designated procedures when working around molten metal and high-temperature equipment. Participate in safety briefings, toolbox talks, and required training. Report accidents, near misses, hazards, and unsafe practices immediately. Follow established emergency response procedures. Housekeeping & Equipment Care Maintain cleanliness and good housekeeping within the furnace and melt shop areas. Assist with routine cleaning and basic operational maintenance as directed. Ensure tools and equipment are properly handled, stored, and maintained. Report damaged or malfunctioning equipment to the responsible supervisor. Keep work areas free from unnecessary materials and obstructions. Teamwork & Operational Support Work closely with furnace operators, casting teams, maintenance personnel, quality teams, and production supervisors. Follow instructions from supervisors and authorized technical personnel. Support shift handovers by communicating relevant operational information. Assist other production activities when required and within the scope of the role. Maintain discipline, punctuality, and effective teamwork throughout assigned shifts. QUALIFICATIONS Minimum KCSE qualification or equivalent. Previous experience in a steel manufacturing, foundry, metal processing, furnace, melt shop, or heavy industrial environment is an added advantage. Technical training in mechanical, electrical, production, welding, fabrication, or a related field is an added advantage. Experience working in a shift-based industrial production environment is an added advantage. Must be physically fit and able to work in a hot, noisy, and demanding industrial environment. Ability to follow safety procedures and operating instructions is essential. COMPETENCIES Basic understanding of industrial production processes. Basic understanding of furnace and melting operations. Ability to follow operating procedures and production instructions. Basic equipment inspection and operational awareness. Occupational health and safety awareness. Ability to identify and report abnormal operating conditions. Good housekeeping and workplace organization. Strong safety-conscious mindset. Physical stamina and ability to work under demanding conditions. Accountability and responsibility. Ability to remain alert and focused during operations. End Date 9th November 2026

a month ago