Manufacturing

Machine Operator

G-Prest Imperial Limited·Imo, nigeria·Full Time·Onsite
ManufacturingFull TimeOnsite
-

Run the machines you are assigned, watch how they perform, and report faults straight away.

Machine operators run production equipment in the feed mill and follow the day’s schedule.

What you will do

  • Operate the machines and equipment you are assigned.
  • Watch machine performance while they are running.
  • Report faults or anything abnormal straight away.
  • Help with basic cleaning and routine care.
  • Follow safety rules, operating instructions, and your supervisor’s schedule.

What you need

  • School certificate (WAEC, NECO, or GCE).
  • One to two years as a machine operator, or in a factory.
  • Willingness to learn and to follow safety rules.
  • Fitness for factory work, and readiness to start as soon as you are selected.

Key skills

First School Leaving CertificateSecondary School (SSCE)VocationalOthers
Apply Now

At a glance

Company

G-Prest Imperial Limited

Location

Imo, nigeria

Employment

Full Time

Experience

Valid until

Not specified

Created

October 28, 2026

More opportunities

Similar roles you might like

Pvc Board Production Line Supervisor (local)

Protege Management

Lagos, Nigeria

full-time

Protg Management is a premier boutique Executive Search and a Human Resource Consulting organisation that offers both national and international companies bespoke human capital consulting products and services across diverse sectors. We are recruiting to fill the position below: Job Title: PVC Board Production Line Supervisor (Local) Location: Lekki Free Zone, Lagos Employment Type: Full-time Reports to: Chinese Production Manager Job Summary Take full charge of the day-to-day operation of the PVC board production line: delivering the production plan, keeping thickness, density and surface quality consistent, keeping equipment running, and ensuring the safety of personnel and environmental compliance on site. Job Responsibilities Production Operations Management: Execute the daily PVC board production plan and deliver on time to order specifications. Coordinate all process stages mixing, extrusion/foaming, calibration, haul-off, cutting and stacking. Monitor process parameters (temperature, pressure, haul-off speed) and improve output and yield. Quality Management: Apply the PVC formulation and process strictly. Monitor board thickness, density, surface flatness, colour and edge quality; handle defects such as blistering, collapse and colour variation. Supervise incoming material inspection and sample retention (resin, calcium carbonate, additives). Equipment Maintenance: Establish and implement inspection, lubrication and maintenance schedules for extruders, dies, calibration tables and haul-off/cutting machines. Organise screw cleaning, die changes and troubleshooting of common faults; support overhauls. Manage the spare parts register and control repair costs. Safety and Environmental Protection: Enforce safety and ventilation requirements for high-temperature extrusion, calcium carbonate dust and chemical additives. Control dust and scrap in line with local environmental and community requirements. Organise emergency drills and ensure fire-fighting equipment and PPE are in place. Personnel and Shift Management: Manage rostering, training and assessment of local operators, mixers, machine operators and helpers. Communicate and implement the Chinese management team's requirements; improve skills and discipline. Handle on-site labour relations and maintain a stable team. Raw Materials and Inventory: Maintain inventory and consumption records, give early warning of shortages and avoid production stoppages caused by missing materials. Data and Reporting: Record and consolidate daily data on output, formulations, equipment operation, quality and safety. Submit a weekly production report and propose improvements to capacity, cost and process. Qualifications Interested candidates should possess relevant qualifications with 3-6 years cognate experience. Interest in and respect for Chinese culture and Chinese personnel, with a strong ability to adapt to the company's management system and corporate culture. Background in polymer materials, mechanical engineering or building materials. Experience on a PVC extrusion/foamed board line is preferred. Familiar with the basic structure and maintenance of extrusion lines; able to read and complete production records and reports. Experience managing local teams, with a strong safety mindset. Communicates clearly, works with a strong sense of responsibility and can handle emergencies.

6 days ago

Packing Plant Maintenance Specialist

Dangote

Kogi, nigeria

full-time

Job Summary The Packing Plant Maintenance Specialist at Dangote Cement Plc Supports the Head of Packing Plant to oversee maintenance operations in cement packing and loading activities to ensure proper packing and timely loading of cement at the plant. Ensure packing plant activities comply with regulatory requirements and DCP specification to ensure preset quality standards are maintained. Key Duties and Responsibilities Ensure that all maintenance packing plant activities are carried out efficiently and in a timely manner. Support to oversee the activities of all packing plant machine operators to ensure safety of personnel and appropriate utilisation of machines Oversee the implementation of approved packing plant plan at the plant to ensure established targets are met. Ensure that packing plant processes are implemented in line with agreed upon procedures and guidelines. Ensure clearance is received from the Head, Production and Head, Quality Control & Assurance before commencement of packing and loading of cement. Supervise the management of packing plant shift teams to ensure effective and efficient execution of packing plant activities and achievement of daily production targets. Ensure all maintenance issues at the packing plant are resolved immediately to ensure timely dispatch of cement and prevent damage/loss. Provide leadership and guidance to subordinates. Perform any other duties assigned by the Head Packing Plant (Operations & Maintenance). Requirements Bachelor's degree or its equivalent in Mechanical Engineering. Postgraduate/relevant professional qualification will be an added advantage. Minimum of fifteen (15) years relevant work experience with at least four (5) years at supervisory level. Skill and Behaviours: In-depth knowledge of cement production process Excellent project management and leadership skills Good problem solving and analysis skills Ability to pay attention to details Good relationship management skills In-depth knowledge of best practice in packing plant operations In-depth knowledge of the cement packing machines and their functions Proficiency in Microsoft Office Suite.

11 days ago

Mechanical Engineer (entry Level)

Candel FZE

Lagos, nigeria

full-time

The Candel FZE is a manufacturing company engaged in the development, production, marketing and distribution of agrochemicals, specialised fertilisers, seeds and allied products in Nigeria. It is located in the Lekki Free Zone, Ibeju- Lekki, Lagos; near Dangote Refinery. We are recruiting to fill the position below: Job Position: Mechanical Engineer (Entry Level)  Job Location: Ibeju Lekki, Lagos Employment Type: Full-time Job Description We are looking for a Mechanical Engineer (Entry Level) to join our team. You will be trained on all stages of our production cycles, from research and design to manufacturing, installation, and evaluation. You will report to the factory manager. Responsibilities Assist in designing, manufacturing, and installing components that fulfill requirements. Analyzing problems or deficiencies and developing solutions to resolve them. Participate in conducting experiments and evaluations to improve and innovate product designs. Creating plans and designs using CAD technology. Estimating budgets and time scopes for each project. Writing technical documentation for machine operators. Ensuring that products meet compliance regulations. Collaborating with project managers and other engineers in our team. Requirements Bachelor's Degree in either Mechanical or Mechatronics Engineering with a maximum grade of Second Class Honours, Lower Division from a Nigerian university. Our Ideal candidate is aged not more than 29 years old. Should have the ability to communicate technical ideas in a clear manner, both visually and verbally. Knowledge of Good Manufacturing Practices (GMP), ISO standards, and relevant health, safety, and environmental regulations. May be required to work shifts, weekends, or public holidays, depending on production schedules. Method of Application  Interested and qualified candidates should send their CV to: hr@candelcorp.com using the Job Position as the subject of the email.

15 days ago

Metal Fabricator

ReelFruit

Abeokuta, Ogun Employment Type: Full-time, Ogun, Nigeria

full-time

ReelFruit, founded in 2012, is the market leader in the healthy snack category, pioneering the introduction of healthy dried fruit as a snack in the Nigerian market. The company was founded on a mission to build a scalable agribusiness to add value to the local fruit value chain, produced, package and distribute locally made snacks that could sit on any shelf in the world! We are recruiting to fill the position below: Job Title: Metal Fabricator Location: Abeokuta ,Ogun Employment Type: Full-time Job Summary The Metal Work Fabricator is responsible for designing, assembling, modifying, and repairing machinery, equipment, tools and other metal installations in the facility. This role requires expertise in metal fabrication, welding, machining, and blueprint reading to ensure machines are built to specification and function efficiently. The Metal Fabricator will work closely with the maintenance and production teams to improve the system and minimize downtime. Duties and Responsibilities Fabrication & Assembly: Manufacture and assemble machine components using welding, cutting, and machining techniques. Read and interpret technical drawings, blueprints, and schematics to fabricate machine parts accurately. Operate fabrication tools such as lathes, milling machines, grinders, and CNC equipment. Ensure all fabricated components meet dimensional and structural specifications. Machine Modification & Repair: Modify or repair existing machinery and equipment to improve performance and extend lifespan. Conduct inspections of fabricated parts to ensure quality, alignment, and functionality. Assist maintenance teams in troubleshooting mechanical faults and implementing solutions. Quality Control & Safety: Inspect fabricated parts and machines for defects and adherence to specifications. Ensure all fabricated components meet food safety and regulatory standards. Conduct load tests and performance checks before deploying machines to production. Adhere to all workplace safety guidelines, including PPE use and proper handling of tools and materials. Collaboration & Documentation: Work with the engineering team to develop custom machine solutions. Maintain accurate records of fabrication projects, including design changes and materials used. Provide technical support and training to machine operators when necessary. Educational Qualifications, Experience & Requirements Diploma or Bachelor's degree in Mechanical Engineering, Industrial Technology, or a related field. 3+ years of experience in machine fabrication, metalworking, or mechanical assembly. Hands-on experience with welding (MIG, TIG, Arc), machining, and CNC operations. Technical Skills: Proficiency in reading blueprints, CAD drawings, and schematics. Knowledge of industrial machinery and automation systems. Strong troubleshooting and mechanical repair skills. Soft Skills: Attention to detail and precision in fabrication work. Strong problem-solving and analytical skills. Ability to work independently and as part of a team.

15 days ago

Metal Fabricator (abeokuta)

ReelFruit

Abeokuta, nigeria

full-time

The Metal Work Fabricator is responsible for designing, assembling, modifying, and repairing machinery, equipment, tools and other metal installations in the facility. This role requires expertise in metal fabrication, welding, machining, and blueprint reading to ensure machines are built to specification and function efficiently. The Metal Fabricator will work closely with the maintenance and production teams to improve the system and minimize downtime. Duties and Responsibilities Fabrication & Assembly: Manufacture and assemble machine components using welding, cutting, and machining techniques. Read and interpret technical drawings, blueprints, and schematics to fabricate machine parts accurately. Operate fabrication tools such as lathes, milling machines, grinders, and CNC equipment. Ensure all fabricated components meet dimensional and structural specifications. Machine Modification & Repair: Modify or repair existing machinery and equipment to improve performance and extend lifespan. Conduct inspections of fabricated parts to ensure quality, alignment, and functionality. Assist maintenance teams in troubleshooting mechanical faults and implementing solutions. Quality Control & Safety: Inspect fabricated parts and machines for defects and adherence to specifications. Ensure all fabricated components meet food safety and regulatory standards. Conduct load tests and performance checks before deploying machines to production. Adhere to all workplace safety guidelines, including PPE use and proper handling of tools and materials. Collaboration & Documentation: Work with the engineering team to develop custom machine solutions. Maintain accurate records of fabrication projects, including design changes and materials used. Provide technical support and training to machine operators when necessary. Educational Qualifications, Experience & Requirements Diploma or Bachelor\'s degree in Mechanical Engineering, Industrial Technology, or a related field. 3+ years of experience in machine fabrication, metalworking, or mechanical assembly. Hands-on experience with welding (MIG, TIG, Arc), machining, and CNC operations. Technical Skills: Proficiency in reading blueprints, CAD drawings, and schematics. Knowledge of industrial machinery and automation systems. Strong troubleshooting and mechanical repair skills. Soft Skills: Attention to detail and precision in fabrication work. Strong problem-solving and analytical skills. Ability to work independently and as part of a team.

16 days ago

Achine Operator (nylon Processing)

Elizabeth Maddeux

Elizabeth, nigeria

full-time

Job Summary We are seeking experienced and technically competent Machine Operators to operate and monitor nylon processing machinery, ensuring efficient production, product quality, and compliance with established safety and production standards. Key Responsibilities Operate and monitor nylon/polythene processing and production machines. Set up machines and adjust operating parameters according to production specifications. Maintain accurate production records, including output, downtime, and material usage. Minimize material wastage and optimize machine efficiency. Follow production schedules and meet daily output targets. Ensure compliance with workplace health, safety, and environmental procedures. Work closely with the Production, Maintenance, and Quality Control teams. Report machine breakdowns, defects, and other production issues promptly. Requirements Minimum of SSCE/OND; relevant technical qualifications is an advantage. 3 - 5 years of experience operating machines in nylon, polythene, plastic, packaging, or related manufacturing environments. Hands-on experience with nylon/polythene processing machinery. Good understanding of production processes and machine safety. Ability to work under pressure and meet production targets.

23 days ago