Manufacturing

Machine Operator

Adcorp Blu·Somerset West, south-africa·Default
Manufacturingentry-levelDefault
-Closes 24 Dec 2026

KEY RESPONSIBILITIES

Assist with daily production activities.

Operate machinery and production equipment as instructed and authorised.

Follow production schedules and work instructions.

Conduct basic quality checks.

Maintain housekeeping standards in the production area.

Comply with health, safety and operational procedures.

Report equipment faults, production irregularities and safety concerns.

Desired Skills:

Machine Operator

Machine maintenance

Machinery operation

Machine setting

Desired Qualification Level:

Grade 12 / Matric

About The Employer:

Our client based in Somerset West is looking for an experienced Machine Operators at one of their Sites in Somerset. The successful candidates should possesses the following skills and experience: MINIMUM REQUIREMENTS - Grade 12 / Matric certificate is essential- Mathematics and Physical Science, or relevant technical subjects.- Technical Mathematics and Technical Science will be advantageous.- N-Level Qualifications in Mechanical, Electrical and Chemical engineering will be advantageous.- Previous production, manufacturing or factory experience will be advantageous.- Ability to follow work instructions and standard operating procedures.- Good communication and basic numerical skills.- Strong attention to detail and commitment to workplace safety.- Willingness to work shifts, if required.

At a glance

Company

Adcorp Blu

Location

Somerset West, south-africa

Employment

Default

Experience

entry-level

Valid until

December 24, 2026

Created

November 20, 2026

More opportunities

Similar roles you might like

Senior Flexographic Printing Specialist

Greys Personnel

KwaZulu Natal - Mobeni, south-africa

FULL_TIME

Key Responsibilities Provide technical support and troubleshoot printing-related problems across various printing machines. Assist with the set-up, operation and optimisation of printing machines. Provide technical guidance on Flat Bag and SO Bag machines fitted with inline printing units. Develop and document practical printing set-up procedures, processes and operating manuals. Advise on plate mounting, reel changes, colour matching and paper tension control. Provide technical guidance on print and ink sequencing, anilox selection and ink coverage. Identify and resolve printing defects and ink-related challenges. Assist with quick machine changeovers and improving production efficiency. Transfer technical knowledge and provide guidance and training to existing machine operators. Minimum Technical Requirements The ideal candidate must have: Extensive hands-on experience in the industrial printing industry. Proven experience with wide-web printing . Strong knowledge of flexographic printing processes and printing machinery. Practical experience with printing machine set-up, operation and troubleshooting. Knowledge of plate mounting, colour matching, reel changes and tension control. Understanding of ink systems, print sequences and anilox selection. Experience working with different printing substrates, ink coverage and print requirements. The ability to identify printing problems and recommend practical technical solutions. Experience developing procedures or training other operators would be highly beneficial. Advantageous Experience Experience in water-based printing on paper. Background in flexible packaging, paper bag manufacturing or similar production environments. Exposure to Flat Bag and SO Bag machines with integrated printing units.

2 days ago

Senior Artisan

AECI Limited

Gauteng, south-africa

full-time

Job Purpose To lead and execute advanced machining, toolmaking, and CNC operations for the manufacture, maintenance, and modification of precision tools, dies, moulds, jigs, fixtures, and complex mechanical components. The role ensures optimal tooling performance, minimal production downtime, and compliance with quality and safety standards while mentoring junior artisans and apprentices. Key Responsibilities Technical & Operational Manufacture, assemble, repair, and modify tools, dies, moulds, jigs, and fixtures to precise tolerances. Program, set, and operate CNC machines (milling and turning). Perform advanced conventional machining (lathe, milling, grinding, EDM where applicable). Interpret complex engineering drawings, CAD models, and specifications. Conduct root cause analysis on tooling failures and implement corrective actions. Ensure tooling supports production efficiency and product quality standards. Perform precision measurements using advanced measuring instruments and gauges. Oversee machine setups and ensure compliance with machining best practices. Leadership & Mentorship Guide and mentor junior artisans, apprentices, and machine operators. Allocate tasks within the toolroom or machining section. Support skills transfer and continuous improvement initiatives. Provide technical input into tooling design improvements. Quality, Safety & Compliance Ensure adherence to SHE standards and company policies. Maintain strict tolerance and quality standards. Ensure machines are maintained and calibrated. Support audits and compliance inspections. 4. Maintenance & Continuous Improvement Participate in breakdown support and shutdown activities. Drive continuous improvement in machining processes. Recommend tooling upgrades or process enhancements to reduce downtime. Minimum Qualifications Grade 12 (Matric). Recognized Trade Test Certificate (Tool & Die Maker / Machinist). CNC Programming certification (advantageous). N4 - N6 Mechanical Engineering (advantageous). Valid driver's license (if required). Experience Minimum 5 - 8 years post-trade experience in a manufacturing, mining, or heavy engineering environment. Proven experience in tool and die manufacturing and maintenance. Strong CNC programming and machine setup experience. Experience with tight tolerances and complex precision components. Supervisory or senior artisan experience preferred. Knowledge & Skills Advanced machining principles and tooling design knowledge. CNC programming (Fanuc / Siemens / Haas or equivalent systems). Strong troubleshooting and problem-solving ability. Excellent interpretation of technical drawings and CAD models. High attention to detail and accuracy. Strong leadership and coaching skills. Knowledge of quality standards and ISO compliance (if applicable). Key Competencies Technical mastery Leadership and mentoring Quality orientation Accountability and ownership Safety consciousness Continuous improvement mindset Decision-making and problem-solving Date Closing: Nov 26, 2026

2 days ago

Utilities And Services Engineering Manager

RCL Foods

Gauteng, south-africa

full-time

RCL FOODS is seeking an experienced Utilities and Services Engineering Manager to join our Culinary & Pet Business Units based in Randfontein. Purpose: To ensure the safe, reliable, and efficient operation of all site utility and distribution systems including steam, refrigeration, water, compressed air, electrical, control and instrumentation, boiler making, mechanical services, effluent treatment facilities, and building infrastructure. The incumbent will provide engineering leadership to optimise asset performance, improve plant availability through reliability and maintenance best practices, and execute utilities and facilities improvement maintenance projects. The role is responsible for ensuring statutory compliance, environmental sustainability, and the effective management of utility assets, engineering services assets, personnel, service providers and building assets. Minimum Requirements Diploma or degree in Mechanical Engineering. GCC Factories essential. Category B Ammonia Competency Certificate advantageous. 5 years plus experience post-GCC in a plant with complex Utilities and Services, as a Plant Engineer or as an Engineering Manager, in an FMCG environment. Hands-on knowledge of maintaining and managing the plant and equipment and reticulation systems for steam, ammonia and general refrigeration, water, compressed air, electrical, control and instrumentation and building infrastructure. Experience leading and developing teams and working with a very flat leadership structure, i.e. Engineering Manager has foreman as direct reports with no Plant Engineer position. Strong problem-solving, leadership, communication, and decision-making skills. Demonstrated ability to coach and build team capability. Duties & Responsibilities Safety, Health & Compliance Drive compliance with SHERQ, food safety, OHSA, and process safety requirements. Lead ammonia and steam process safety management initiatives. Identify and resolve unsafe conditions and behaviours. Drive sustainability and governance standards. Manage risk assessments with avoidance, mitigation and control standards in place. Reliability & Maintenance Ensure optimal availability of all utilities and services. Drive execution of routine preventative and predictive maintenance and lead root-cause analysis and problem solving. Lead the development of maintenance standard maintenance procedures. Ensure problem solving tools are used by the team and take part in problem solving sessions. Lead the development of the reliability plan for utilities plant and services and ensure maintenance team has the required competencies. Determine material, equipment and supplies requirements and ensure that these are ordered and available, in conjunction with the input of the planner. Use planned maintenance schedules and general work schedules to co-ordinates daily, weekly and monthly activities of foreman, artisans, machine operators and assistants. Supervise and assign maintenance work to contractors daily, ensuring clear allocation of responsibility and accountability. Control daily job cards, by issuing to employees, receive back completed ones and verify work is done satisfactorily. Optimisation Analyse performance data and develop road maps to identify medium- and long-range capex requirements and improvement plans. Identify and implement best in class cost saving initiatives and in-fiscal performance improvement and capex plans. Evaluate and sign off new equipment and all modifications. Leadership & Operations Lead with demonstrated delivery of the RCL Foods Values and Leadership Standards. Lead and manage the boiler house, mechanical and boiler making, electrical, control and instrumentation, refrigeration, building infrastructure and effluent teams. Provide afterhours and weekend support on site. Manage training, development, leave planning and employee relations. Monitor performance of team. Measure and attain KPI's and institute corrective action when performance is below par. Perform work inspections and check for completeness of tasks and compliance with legislative, SHERQ and business procedures. Partner with HR to recruit and develop high-performing teams and drive employee morale. Ensure effective utility and services stakeholder communication. Supports and advises engineering staff / contractors and operators on the execution of their tasks. Maintain discipline and standards in area of responsibility. Deadline:16th November,2026

8 days ago

Utilities And Services Engineering Manager (ftc)

RCL Foods

Gauteng, south-africa

full-time

RCL FOODS is seeking an experienced Utilities and Services Engineering Manager (FTC) to join our Culinary & Pet Business Units based in Randfontein. Purpose: To ensure the safe, reliable, and efficient operation of all site utility and distribution systems including steam, refrigeration, water, compressed air, electrical, control and instrumentation, boiler making, mechanical services, effluent treatment facilities, and building infrastructure. The incumbent will provide engineering leadership to optimise asset performance, improve plant availability through reliability and maintenance best practices, and execute utilities and facilities improvement maintenance projects. The role is responsible for ensuring statutory compliance, environmental sustainability, and the effective management of utility assets, engineering services assets, personnel, service providers and building assets. Minimum Requirements Diploma or degree in Mechanical Engineering. GCC Factories essential. Category B Ammonia Competency Certificate advantageous. 5 years plus experience post-GCC in a plant with complex Utilities and Services, as a Plant Engineer or as an Engineering Manager, in an FMCG environment. Hands-on knowledge of maintaining and managing the plant and equipment and reticulation systems for steam, ammonia and general refrigeration, water, compressed air, electrical, control and instrumentation and building infrastructure. Experience leading and developing teams and working with a very flat leadership structure, i.e. Engineering Manager has foreman as direct reports with no Plant Engineer position. Strong problem-solving, leadership, communication, and decision-making skills. Demonstrated ability to coach and build team capability. Duties & Responsibilities Safety, Health & Compliance Drive compliance with SHERQ, food safety, OHSA, and process safety requirements. Lead ammonia and steam process safety management initiatives. Identify and resolve unsafe conditions and behaviours. Drive sustainability and governance standards. Manage risk assessments with avoidance, mitigation and control standards in place. Reliability & Maintenance Ensure optimal availability of all utilities and services. Drive execution of routine preventative and predictive maintenance and lead root-cause analysis and problem solving. Lead the development of maintenance standard maintenance procedures. Ensure problem solving tools are used by the team and take part in problem solving sessions. Lead the development of the reliability plan for utilities plant and services and ensure maintenance team has the required competencies. Determine material, equipment and supplies requirements and ensure that these are ordered and available, in conjunction with the input of the planner. Use planned maintenance schedules and general work schedules to co-ordinates daily, weekly and monthly activities of foreman, artisans, machine operators and assistants. Supervise and assign maintenance work to contractors daily, ensuring clear allocation of responsibility and accountability. Control daily job cards, by issuing to employees, receive back completed ones and verify work is done satisfactorily. Optimisation Analyse performance data and develop road maps to identify medium- and long-range capex requirements and improvement plans. Identify and implement best in class cost saving initiatives and in-fiscal performance improvement and capex plans. Evaluate and sign off new equipment and all modifications. Leadership & Operations Lead with demonstrated delivery of the RCL Foods Values and Leadership Standards. Lead and manage the boiler house, mechanical and boiler making, electrical, control and instrumentation, refrigeration, building infrastructure and effluent teams. Provide afterhours and weekend support on site. Manage training, development, leave planning and employee relations. Monitor performance of team. Measure and attain KPI's and institute corrective action when performance is below par. Perform work inspections and check for completeness of tasks and compliance with legislative, SHERQ and business procedures. Partner with HR to recruit and develop high-performing teams and drive employee morale. Ensure effective utility and services stakeholder communication. Supports and advises engineering staff / contractors and operators on the execution of their tasks. Maintain discipline and standards in area of responsibility. Deadline:16th November,2026

8 days ago

Cnc Operator - Parow Industrial

Pump & Abrasion Technologies

Western Cape, south-africa

full-time

We are looking for a skilled CNC Operator to set up, maintain and operate computer numerical control (CNC) machines. You will be responsible for producing high-quality precision parts and ensuring the machines are running efficiently and accurately. ROLE PURPOSE Programming, setting up and operating a computer numerical control (CNC) machining. Measure and verify all calculations prior to setting up the machinery. Enter all relevant codes to specify the feed, speed, and cut of any toolpath for a CNC. Reading and interpreting blueprints, diagrams, drawings and work instructions. Loading and unloading workpieces and CNC production equipment. Monitoring machining operations and performing quality control checks. Following safety requirements and maintaining certifications. Complete routine maintenance of their machinery. Maintain a clean and organized working environment. Shift work. DESIRED QUALIFICATIONS AND SKILLS Skills Ability to translate mechanical documents and engineering drawings. Great attention to detail with a goal-driven attitude. Strong comprehension and analytical abilities. Good computer and mathematical skills. Understanding of Fanuc controls Experience on Vertical CNC lathes will be advantageous Qualifications Certificate or diploma in engineering is an advantage. 3 years' experience as a CNC Machine Operator. Relevant trade qualification required Microsoft Office Intermediate Valid driver's license

11 days ago