Manufacturing

Joiner

Greys Personnel·Sandton, Gauteng, south-africa·FULL_TIME
ManufacturingmanagerFULL_TIME
-Closes Nov 26, 2026

Our client based in Johannesburg Sandton Area is looking for a Joiner to construct, install, repair and maintain stone structures and finishes in accordance with construction drawings, project specifications, quality standards and health and safety requirements. Qualifications and Experience Relevant carpentry or joinery trade qualification, certificate or equivalent practical experience. Proven experience in joinery manufacturing, installation and finishing. Ability to read and interpret technical drawings and joinery specifications. Knowledge of timber types, wood-based boards, fittings, adhesives and finishing materials. Experience operating woodworking machinery and using hand and power tools. Understanding of installation tolerances, accurate setting-out and quality control. Knowledge of workplace health and safety procedures. Key Duties and Responsibilities Read and interpret technical drawings, joinery details, plans and specifications. Measure, mark, cut and shape timber, plywood, MDF, veneers and other materials accurately. Manufacture and assemble doors, door frames, window frames, cabinets, cupboards, shelving, counters and other joinery items. Install and fit doors, frames, skirting boards, architraves, mouldings, panelling and other timber components. Install built-in cupboards, kitchen units, wardrobes and custom-made furniture where required. Use hand tools, power tools and woodworking machinery safely and correctly. Select suitable materials, fixings, adhesives and finishes for each task. Ensure all joinery components are correctly aligned, level, square and securely fitted. Carry out repairs, adjustments and maintenance to existing woodwork and fittings. Sand, prepare and finish surfaces to the required standard before painting, sealing or varnishing. Check completed work for defects and rectify any issues to meet project quality requirements. Take accurate measurements on site and confirm dimensions before manufacturing or installation. Calculate material requirements and minimise wastage. Maintain tools, equipment and machinery in good working condition. Keep the workshop and work areas clean, organised and free from hazards. Coordinate with other trades to ensure installations are completed in the correct sequence. Report work progress, material shortages, defects and technical problems to the Site Supervisor. Comply with company procedures, project deadlines and occupational health and safety requirements.

At a glance

Company

Greys Personnel

Location

Sandton, Gauteng, south-africa

Employment

FULL_TIME

Experience

manager

Valid until

November 26, 2026

Created

October 27, 2026

More opportunities

Similar roles you might like

Security Engineer (cyber Security & Grc)

Kaelo

Gauteng, south-africa

full-time

Job Description Role Purpose The Security Engineer is Kaelo's dedicated cyber security capability. Reporting to the Head of IT, the role combines hands-on engineering of security controls across the technology estate with the governance, risk and compliance work required to evidence those controls to regulators, auditors and customers. A significant part of the role is security assurance in both directions: completing the security questionnaires that customers send to Kaelo, assessing Kaelo itself and its vendors, and working with internal teams or the vendor concerned to close the gaps found. The incumbent also creates and maintains the Information Security Management System (ISMS) supporting Kaelo's pursuit of ISO 27001 certification, under the direction of the IT Executive, and supports alignment to FSCA Joint Standard 2, POPIA, the Cybercrimes Act, the CIS Controls and the NIST Cybersecurity Framework. Key Responsibilities Security Engineering & Control Implementation Implement, configure and maintain technical security controls across endpoints, servers, cloud, network and identity. Operate endpoint detection and response, email security, web filtering and data loss prevention tooling. Harden systems against CIS Benchmarks and maintain secure baseline configurations across the estate. Work with the Cloud Engineer to apply security controls in the Cloud and co-location environments. Identity & Access Management Maintain multi-factor authentication, conditional access and privileged access controls, enforcing least privilege. Run periodic user access reviews and retain the evidence these produce. Ensure joiner, mover and leaver processes are enforced and evidenced. Vulnerability Management, Monitoring & Incident Response Run vulnerability scanning, triage and remediation tracking, and co-ordinate penetration tests and the closure of their findings. Monitor security alerts and logs, triage events and escalate in line with the incident response plan. Support the response to security incidents, including containment, recovery and post-incident review, under the direction of the IT Executive and as executed by the Head of IT. Support statutory notification obligations, including POPIA breach notification and reporting under the Cybercrimes Act. Security Questionnaires & Third-Party Assurance Complete security questionnaires received from customers and prospective customers, providing accurate responses and supporting evidence on Kaelo's behalf. Maintain a library of approved standard responses, policies and evidence so that questionnaires are answered consistently and quickly. Issue security questionnaires to Kaelo's vendors and service providers, assess the responses and rate the risk. Self-assess Kaelo against its own policies and the frameworks it aligns to, identifying control gaps. Work with internal teams or the relevant vendor to agree remediation of gaps and track it through to closure. ISMS, Governance & Compliance Maintain the ISMS under the direction of the IT executive, including the risk register, risk treatment plan and Statement of Applicability. Implement and evidence Annex A controls, and maintain the evidence required for internal audit and ISO 27001 certification audits. Support control mapping and gap assessment against FSCA Joint Standard 2, the CIS Controls and the NIST Cybersecurity Framework. Maintain the information security policy set and support POPIA compliance in partnership with the Information Officer. Awareness, Resilience & Reporting Run the security awareness programme, including phishing simulation. Contribute to business continuity and disaster recovery planning from a cyber resilience perspective. Report on security posture, questionnaire activity, vendor risk and gap remediation to the Head of IT and IT executive. Alignment, Reporting & Escalation Align work to, and execute, the direction and strategy set by the IT Executive. Communicate progress and escalate issues and risks to the IT Executive, through the Head of IT where appropriate, promptly and transparently. Qualifications Qualifications Bachelor's degree or national diploma in Computer Science, Information Systems, Information Security or a related field. Recognised security certification such as CompTIA Security+, CySA+ or Microsoft SC-200/SC-300; CISSP, CISM or ISO 27001 Lead Implementer advantageous. Experience Essential Minimum 5 years' experience in information or cyber security, with hands-on technical depth. Experience implementing and operating technical security controls across endpoint, network, cloud and identity. Experience completing or assessing third-party security questionnaires and tracking remediation of the gaps found. Practical exposure to ISO 27001, the CIS Controls or the NIST Cybersecurity Framework. Experience with vulnerability management and security monitoring. Working knowledge of POPIA and its application to security controls. Preferred Exposure to an ISO 27001 certification or surveillance audit. Experience in financial services, insurance or healthcare, and familiarity with FSCA Joint Standard 2. Experience with Microsoft security tooling (Defender, Sentinel, Entra ID). Scripting ability for security automation and evidence collection. Technical Competencies Security Control Implementation across Endpoint, Network, Cloud & Identity Security Questionnaire Completion & Evidence Management Vendor Security Assessment & Third-Party Risk Control Gap Assessment & Remediation Tracking ISO/IEC 27001 ISMS Operation & Annex A Controls FSCA Joint Standard 2, CIS Controls & NIST CSF POPIA & Cybercrimes Act Application Identity, Access & Privileged Access Management Vulnerability Management Security Monitoring & Incident Response Security Awareness Programme Delivery Core Competencies Judgement distinguishes real risk from theoretical risk and prioritises accordingly. Integrity represents Kaelo's security position accurately to customers, auditors and management. Clear Communication writes precise questionnaire responses and explains gaps plainly to vendors and internal teams. Influence secures cooperation for remediation without formal authority over those implementing it. Ownership & Accountability drives findings to closure rather than to a register. Key Performance Indicators (KPIs) Turnaround time and accuracy of customer security questionnaire responses. Proportion of in-scope vendors assessed, and vendor gaps remediated within agreed timeframes. Closure of gaps identified in Kaelo's self-assessments. Currency of the ISMS risk register, risk treatment plan and Statement of Applicability. Vulnerability remediation within agreed service levels by severity. Closure rate of penetration test and audit findings. Awareness programme completion and phishing simulation results. Regulatory, Risk & Information Security Responsibilities Comply with POPIA in the handling of personal and special personal information, including member health information, and with the Cybercrimes Act, reporting any suspected unlawful access or compromise without delay. Adhere to Kaelo information security policies and the frameworks the organisation aligns to, including FSCA Joint Standard 2 of 2024, ISO/IEC 27001, the CIS Controls and the NIST Cybersecurity Framework. Maintain the evidence required to support the ISMS and internal, external and certification audits within the area of responsibility. Escalate security incidents, control weaknesses and operational risks promptly, and complete all mandatory compliance and awareness training.

2 hours ago

Handyman (x2 Posts)

Provincial

Siloam Hospital [X1 Post] Mopani District Office [X1 Post], south-africa

Full time

Salary: R170 226 per annum (Level 03) Centre: Siloam Hospital [X1 Post] Mopani District Office [X1 Post] Requirements: Qualifications and Competencies: A National Senior Certificate /Grade 12/Matric ABET / AET at NQF level 4 qualification as recognised by the South African Qualifications Authority [SAQA]. Appropriate verifiable competencies in carpentry and joinery, repairs and installations. Inherent requirements of the job: Ability to use industrial woodwork machinery and electrical power tools etc. Willingness to perform shifts hours, weekend, public holidays and standby duties. Must be physically able to perform duties required. Knowledge And Skills: Conversant with the requirements of the General Machinery Regulations and the Occupational Health and Safety Acts. Duties: Undertake the maintenance of buildings. Carry out minor repairs and maintenance to hospital building. Assist with repairs and emergency breakdowns (including after-hours repairs). Maintain and repair equipment, repair of plant equipment, furniture, fixtures and mechanical fittings. Enquiries: General enquiries about the advertised posts should be directed to Ms Hlokoa RE Tel No: (015) 293 6406, Ms Mompei MM at 015 293 6126 / Ms Sebake RL Tel No: (015) 293 6426, Ms Sebola MF Tel No: (015) 293 6002 and Ms Mothiba JT Tel No: (015) 293 6329 during office hours. Apply with the Z83 form and a CV, quoting the reference number. Source: DPSA Public Service Vacancy Circular.

4 days ago

Mid-weight Draughtsman

Hire Resolve

Cape Town, south-africa

Default

A leading furniture manufacturing business is seeking an experienced Mid-Weight Draughtsman with strong CAD skills and practical knowledge of woodworking, joinery, and manufacturing processes. The successful candidate will develop accurate 3D models, technical drawings, and Bills of Materials (BOMs), translating design concepts into production-ready documentation. They will also oversee prototyping and collaborate with design, technical, and production teams to ensure quality and manufacturing efficiency.Key Responsibilities: Produce accurate 3D models, technical drawings, and production-ready shop drawings. Prepare design packs and BOMs, specifying materials, fittings, and components. Recommend suitable materials and joinery methods for furniture designs. Coordinate prototyping and work with production teams to resolve technical challenges. Maintain an organised digital library of drawings and ensure version control. Update drawings and BOMs following design or material changes. Collaborate with designers, the Technical Manager, and production teams to ensure feasibility and timely delivery. Identify opportunities to improve product quality and production efficiency. 5–10 years of relevant experience in technical furniture design or draughting, preferably involving solid timber and wood-based materials. A three-year diploma or higher qualification in Drafting, Industrial Design, or a related field. Proficiency in SolidWorks and Fusion, or similar CAD software. Strong knowledge of woodworking, joinery, furniture construction, and manufacturing processes. CNC machine or programming experience will be advantageous. Proven project management, problem-solving, and communication skills. Ability to manage deadlines and take designs from concept to production. A proactive, hands-on approach and the ability to work independently and collaboratively. A valid driver's license and reliable transport are essential. Desired Skills: Mid-Weight Draughtsman Mid-Weight Draughtsman Mid-Weight Draughtsman

8 days ago

Handyman

AFMS Group

Western Cape, south-africa

full-time

Key Accountabilities/ Principal Responsibilities Building fabric maintenance Plumbing first line maintenance Electrical first line maintenance General facility maintenance Ad-hoc duties Ensure compliance to Health and Safety Act Attend to client complaints / requests and ensure all calls are logged at the helpdesk Communicate repairs / feedback to FM via Forcelink / daily report Standby for repairs outside of normal working hours Primary Duties Technical Requests Assist in corrective, planned and preventative maintenance. Repairs to all building fabric, carpentry and joinery Repairs to locks, handles hinges and accessories Repairs to office furniture and cabinets Conduct minor building repairs, maintenance and painting Maintain toolboxes and equipment Report all technical defects and assist in rectifying Perform daily routine building inspections and report to line manager Manage general housekeeping and tools register Secondary Duties Move office furniture Assist in unloading big deliveries Move unused furniture or equipment to store Maintain neatness of stores Compile store stock sheet Familiarise with the layout and facilities of the site and adhere to the client house rules Establish and maintain a good working relationship with the management and staff of the site where based Adhere to ad-hoc reasonable requests from management Facility Maintenance Inspect all facilities are in good working order (Planned preventative program) Inspect tiling and paved surfaces Inspect all partitioning, ceilings, roof and building structure Inspect windows and doors are all in good order Inspect all painted surfaces are in good order Inspect all and HVAC equipment are in good order Report / communicate defects / repairs to Manager Key Skills and Experience Grade 12 Min 2 year maintenance working experience in a built environment Good comprehension of English / Afrikaans language Code B Driver's License People and Management Skill Multi skilled Good people skills Practical work experience Hands-on person Ability to plan, organize and control own work effort Understand and follow oral and written instructions Well-motivated Able to work independently Ability to prioritize tasks Able to meet deadlines Able to use initiative to solve minor problems Able to work in a team Pro-active Energetic Able to act quickly and calmly in an emergency situation Key result areas Understand role of reporting to the business and client Understand all outputs delivered are aligned with business requirements Understand that feedback is critical to success

13 days ago