Engineering

Instrumentation Engineer

Glence Instruments Nigeria Limited (GINL)·Rivers, Nigeria·Full Time·Onsite
Engineeringentry-levelFull TimeOnsite
-Closes 30 Nov 2026

Glence Instruments Nigeria Limited (GINL) is a Nigerian engineering and technology company delivering advanced instrumentation, measurement, monitoring and automation solutions to the marine, oil & gas, energy and industrial sectors. We combine engineering expertise, practical field experience and technological innovation to help organisations improve operational efficiency, measurement accuracy, asset reliability and safety.

We are recruiting to fill the position below:

Job Title: Instrumentation Engineer

Location: Port Harcourt, Rivers Job type: Full-time

Responsibilities

Install, configure, calibrate and commission flowmeters and level, pressure and temperature transmitters.

Perform loop checks, troubleshoot signal and communication faults, and document calibration and verification results.

Integrate instruments with monitoring systems for vessel fuel consumption, tank inventory and transfer reconciliation.

Support the company’s expansion into gas measurement.

Requirements

B.Sc., B.Eng. or HND in Instrumentation Engineering, Electrical/Electronic Engineering, Control Engineering or a related discipline is required.

Hands-on instrumentation experience and the ability to interpret P&IDs, loop diagrams and wiring drawings.

Experience with Coriolis flowmeters, radar or hydrostatic level transmitters, 4–20 mA, HART or Modbus is an advantage.

COREN registration will be an added advantage.

Apply Now
Send your CV along with a cover letter toEmail: hr@glenceinstruments.com

Please use the job title as the subject line of your email.

At a glance

Company

Glence Instruments Nigeria Limited (GINL)

Location

Rivers, Nigeria

Employment

Full Time

Work style

Onsite

Experience

entry-level

Valid until

November 30, 2026

Created

November 18, 2026

More opportunities

Similar roles you might like

Automation & Control Engineering

Dexterous Applied Training Institute (DATI)

Rivers, nigeria

full-time

Role Description The Automation & Control Engineering role at DATI is a contract, on-site position based in Port Harcourt. The professional in this role will develop, install, test, and maintain automation and control systems for industrial applications, ensuring reliability, safety, and compliance with relevant standards. Day-to-day tasks include designing control architectures, programming PLCs and HMIs, integrating sensors and field devices, diagnosing faults, and optimizing system performance. The role also involves preparing technical documentation, supporting training delivery for students and client personnel, and collaborating with multidisciplinary teams to implement and improve automation solutions. The engineer may assist in project planning, participate in site assessments, and contribute to continuous improvement initiatives in line with DATI's training and consultancy objectives. Qualifications Candidates should possess strong skills in industrial automation and control systems, including PLC programming, HMI/SCADA configuration, and integration of sensors, actuators, and field instruments. Candidates should possess skills in electrical and instrumentation engineering fundamentals, such as circuit design, wiring and panel layout, control loop design, and interpretation of P&IDs and technical drawings. Candidates should possess technical problem-solving and analytical skills, including fault diagnosis, root-cause analysis, system testing, and performance optimization in complex industrial environments. Candidates should possess project and documentation skills, such as technical report writing, preparation of manuals and schematics, and the ability to follow and develop standard operating procedures. Candidates should possess collaboration and communication skills, including the ability to work in multidisciplinary teams, interact with clients and trainees, and explain technical concepts clearly. Relevant qualifications include a degree or diploma in Automation Engineering, Electrical/Electronic Engineering, Mechatronics, or a related field, along with industry certifications or training in control systems and safety. Experience with automation in oil and gas, manufacturing, or related

3 hours ago

Electrical & Instrumentation Lead

Arcade Engineering

Rivers, nigeria

full-time

Role Purpose The E&I Lead is responsible for providing technical leadership and overseeing the planning, coordination, execution, installation, maintenance, testing and commissioning of electrical and instrumentation systems across oil and gas, power and industrial projects. Key Duties & Responsibilities E&I Engineering Design and Technical Leadership Lead and coordinate electrical and instrumentation engineering design activities, technical reviews and evaluations. Review electrical and instrumentation drawings, specifications, datasheets, cable schedules, loop diagrams, wiring diagrams and control philosophies. Ensure compliance with applicable IEC, IEEE, API and other relevant engineering standards and project specifications. Review electrical load assessments, single-line diagrams, earthing and bonding designs, lighting layouts and hazardous-area classifications. Provide technical guidance on electrical and instrumentation requirements for gas compression systems, gas turbines, rotating equipment, process facilities and industrial installations. Provide technical direction to E&I engineers and technicians and resolve design and engineering challenges. E&I Project Execution and Construction Management Plan, coordinate and supervise E&I installation, construction and project execution activities. Develop and review project execution plans, work packs, method statements, schedules and material requirements for assigned work packages. Coordinate E&I activities with mechanical, civil, process, piping and project management teams. Monitor project progress, manpower utilisation, material availability and cost performance. Ensure that installation activities are carried out in accordance with approved drawings, technical specifications and project requirements. Electrical Systems Installation and Maintenance Oversee the installation, operation, maintenance and troubleshooting of low-voltage (LV) and medium-voltage (MV) electrical systems. Supervise work involving generators, transformers, switchgear, motor control centres (MCCs), variable frequency drives (VFDs), motors, UPS and battery systems. Ensure the integrity and reliability of electrical protection, earthing, bonding and power distribution systems. Lead electrical fault investigations and ensure timely implementation of corrective actions. Review electrical equipment specifications and ensure suitability for intended operational and environmental conditions. Instrumentation and Control Systems Oversee instrumentation installation, calibration, testing, commissioning and maintenance activities. Manage the installation, inspection and maintenance of pressure, temperature, flow and level instruments, transmitters and control valves. Provide technical support for programmable logic controllers (PLC), distributed control systems (DCS), supervisory control and data acquisition (SCADA), emergency shutdown (ESD) and Fire and Gas systems. Supervise instrument loop checks, functional testing, cause-and-effect verification and system integration. Quality Assurance, HSE and Technical Compliance Ensure that all E&I activities comply with approved project specifications, engineering standards, quality requirements and HSE regulations. Enforce compliance with Permit-to-Work (PTW), Lockout/Tagout (LOTO), electrical isolation and other safe working practices. Ensure that appropriate risk assessments, job safety analyses and method statements are completed before work commences. Participate in HAZOP studies, risk assessments and other technical safety reviews where required. Ensure that inspection and test plans (ITPs), inspection records, test certificates and quality documentation are properly maintained. Monitor compliance with applicable electrical safety requirements and hazardous-area installation standards. Education & Work Experience Bachelor's degree or Higher National Diploma (HND) in Electrical/Electronic Engineering, Instrumentation and Control Engineering or a related discipline. Minimum of 7 - 10 years' relevant experience in electrical and instrumentation engineering, preferably within oil and gas, power generation, EPC or industrial engineering environments. At least 3 years in a supervisory, lead or engineering project management capacity. Demonstrable experience in E&I engineering design, installation, maintenance, testing and commissioning. Experience with electrical power distribution systems, instrumentation, automation and industrial control systems. Experience coordinating multidisciplinary engineering teams, contractors and subcontractors. Demonstrable understanding of project execution, quality assurance, HSE and maintenance management requirements. COREN registration is strongly preferred and required Membership of the Nigerian Society of Engineers (NSE) or other relevant professional bodies is desirable. Relevant training and certifications in electrical safety, instrumentation, hazardous-area installations, PLC/DCS systems and commissioning are advantageous. CompEx certification or relevant hazardous-area competency training is an advantage, particularly for roles involving hazardous-area inspection and installation. Competency & Skill Requirements Strong knowledge of electrical power distribution, protection and control systems. Experience with LV/MV switchgear, MCCs, transformers, generators, motors and VFDs. Proficiency in instrumentation, calibration, control valves and process measurement systems. Working knowledge of PLC, DCS, SCADA, ESD and Fire and Gas systems. Understanding of electrical hazardous-area classification and Ex equipment requirements. Ability to interpret engineering drawings, P&IDs, single-line diagrams (SLDs), wiring diagrams and loop diagrams. Knowledge of FAT, SAT, pre-commissioning, commissioning, maintenance and troubleshooting. Familiarity with applicable IEC, IEEE, API and ISO standards. Understanding of preventive and predictive maintenance practices, equipment reliability and asset integrity. Knowledge of electrical safety, PTW, LOTO and HSE requirements. Ability to review technical specifications, vendor documentation and equipment datasheets. Familiarity with relevant engineering design, maintenance and project management software. Key Performance Indicators (KPIs) Project Schedule Delivery E&I Work Quality and First-Time Acceptance HSE Compliance Preventive Maintenance Completion Technical Punch-List Closure E&I Project Cost Performance Commissioning and Handover Documentation

a day ago

Instrumentation & Control Systems Design Engineer

SELEX ENGINEERING AND CONSTRUCTION NIGERIA LIMITED

Lekki, Lagos Employment Type: Full-time, Lagos, Nigeria

full-time₦550,000 per month

Selex Engineering & Construction Company Limited is an indigenous engineering and construction company built to deliver best value across the African market, starting with Nigeria. We provide end-to-end Engineering, Procurement, Fabrication, Construction, Installation, Commissioning, Operations and Maintenance (EPCIC-OM) services, primarily across the oil & gas industry, with plans to extend into power, manufacturing, telecoms and infrastructure. We are recruiting to fill the position below: Job Title: Instrumentation & Control Systems Design Engineer Location: Lekki, Lagos Employment Type: Full-time Role Summary We are seeking qualified and experienced professionals to join its Engineering Team in delivering electrical, instrumentation, control and engineering solutions for oil and gas and industrial projects. The Instrumentation & Control Systems Design Engineer will support the design and development of instrumentation and control systems for oil and gas facilities and industrial projects. The role involves preparing instrumentation engineering deliverables, defining control system interfaces and supporting installation, testing and commissioning activities. Key Responsibilities Prepare instrument indexes, instrument datasheets, I/O lists and instrumentation schedules. Develop instrumentation hook-up drawings, loop diagrams, junction box schedules and cable schedules. Review P&IDs and identify instrumentation and control requirements. Support the selection and specification of field instruments, including pressure, temperature, flow and level transmitters. Prepare control system architecture drawings and instrumentation layouts. Support the development and review of control philosophies, cause-and-effect charts and control system interface documentation. Review vendor documentation and provide technical support during procurement and installation. Participate in site surveys, loop checks, testing, commissioning and troubleshooting activities. Requirements B.Eng/B.Sc in Instrumentation, Control, Electrical, Electronic or a related Engineering discipline. Minimum of 3 years' relevant experience in instrumentation and control engineering, preferably within oil and gas or industrial projects. Proficiency in AutoCAD and interpretation of P&IDs and instrumentation drawings. Good understanding of industrial instrumentation, control systems and field devices. Familiarity with PLC, DCS, SCADA and industrial communication systems. Experience with SmartPlant Instrumentation (SPI/INtools) or similar software is an advantage. Good technical documentation, coordination and problem-solving skills. Salary N550,000 / Month.

7 days ago

Electrical Engineer

HBM Nigeria Plc (Formerly Lafarge)

Nigeria, nigeria

full-time

Job Description The role is responsible for applying Electrical and Instrumentation Engineering knowledge within the cement production environment and independently executing technical work that requires sound judgment in the evaluation, selection, application and adaptation of appropriate techniques, procedures and criteria. What you'll be doing Coordinate and supervise electrical tasks. Ensure the availability of all electrical and instrumentation equipment required for production. Ensure Predictive and Preventive Maintenance Schedules are correctly executed. Ensure compliance with Health and Safety procedures. Follow up with the Electrical Planner on the availability of spares required for execution. Assign and coordinate work for Electrical Technicians and ensure the close-out of assigned tasks. This list of responsibilities is not exhaustive, and the job holder may be required to perform duties outside of this scope as operationally required. Requirements Critical Knowledge: Good knowledge of cement manufacturing processes. Knowledge of medium- and low-voltage electric motors and their applications. Knowledge of ABB switch gear. Knowledge of 11kV/400V power distribution panels and Motor Control Centers. Knowledge of cement industry instrumentation and control systems. Critical Experience: Minimum 4 years' experience in a modern integrated cement plant or large-scale industrial environment in a similar field. Hands-on experience with ABB and Siemens Variable Frequency/Speed Drives. Membership of relevant professional bodies, such as COREN or NSE, would be an advantage. Educational Qualification and Other Requirements Bachelor's degree or equivalent in Electrical/Electronic Engineering. COREN or NSE membership would be an advantage.

16 days ago

Operations And Asset Management

SiSa Method Limited (Abuja & Kogi)

Abuja (FCT), Kogi Employment Type: Full-time, Kogi, Nigeria

full-time

Sisa Method - Our client is developing the Ajaokuta Mini Project in Kogi State, a planned 7 MMscfd mini facility. Site works are under way, plant equipment manufactured in China is in sea transit, and first gas is targeted for April 2027, subject to readiness and approvals. They are recruiting to fill the position below: Job Title: Operations and Asset Manager Location: Abuja (FCT) and Kogi Employment Type: Full-time The Role They are building a lean, high-accountability execution team and are looking for an Operations and Asset Manager to join them. Build the operating model and asset management system in parallel with construction so that theAjaokutaMini-LNG plant can move safely from installation through commissioning to first gas, defining maintenance, procedures, spares, staffing, training and handover requirements. Key Responsibilities Develop the Operations Readiness Plan with owners, deliverables and gate criteria through to stable operation Define the operatingorganisation, staffing, competency matrix, shift model and training requirements Develop operating philosophy and procedures for start-up, normal operation, shutdown, emergency shutdown and isolation Build the asset register, criticality assessment, maintenance strategy, job plans and critical spares lists Coordinate preservation, tagging, inspection and storage of received equipment with Logistics and OEM instructions Participate in systemwalkdownsand review vendor manuals, alarm/trip lists and handover dossiers Set reliability and performance measures, inventory controls and statutory inspection registers Requirements Bachelor’s Degree in Mechanical, Chemical, Electrical or Instrumentation Engineering 7+ years of operations or maintenance experience in gas processing, LNG, power or process plants Experience in operational readiness, commissioning or start-up of new facilities Knowledge of maintenance management systems (CMMS), asset integrity and statutory inspection requirements Ability to write operating and maintenance procedures Strong coordination skills across projects, vendors and HSE teams What We Value Execution discipline, evidence-based reporting, clear communication and a willingness to raise concerns early. They work by theirvalues:Accountability, Responsibility, Efficiency, Teamwork and Excellence.

19 days ago

Sectional Head, Instrumentation

Dangote Group

Obajana, Kogi, Nigeria

Full-time

Dangote Group is one of Nigeria’s most diversified business conglomerates with a hard – earned reputation for excellent business practices and products’ quality with its operational headquarters in the bustling metropolis of Lagos, Nigeria in West Africa. We are recruiting to fill the position below: Job Title: Sectional Head, Instrumentation Location: Obajana, Kogi Job Summary We are looking for a Sectional Head to join our Instrumentation team. The ideal candidate will be responsible for the overall Instrumentation activities of the Cement Mills & Additive transport, implementation of instrumentation engineering and maintenance policies with company policies and procedures to ensure optimal plant availability for production. Key Duties and Responsibilities Review Cement Mills & Additive Transport, instrumentation equipment’s maintenance projections and schedules. Ensure that equipment preventive maintenance programs implemented as per agreed schedule. Monitor the effectiveness of the programs, maintenance reworks and makes recommendations. Enforce standards and safe work procedures for the Cement Mills & Additive Transport and ensure regulations relating to the instrumentation department met at all times in Cement Mills & Additive transport. Provide training development and leader ship to Cement Mills &Additive transport, instrumentation personnel. Requirements Bachelor`s Degree or its equivalent in Electrical & Electronics Engineering or related discipline. Minimum of Fifteen (15) years demonstrated operating experience in maintenance practices, three years of which must in management position. In-depth knowledge of Cement Mills & Additive Transport, operation and maintenance. In-depth knowledge of VRM system operation and maintenance. In-depth knowledge of MV &LV drives operation and maintenance. Aplication Closing Date Not Specified.

23 days ago