Engineering

Hvac Engineer

Mandilas Group Limited·Lagos, Nigeria·Full Time·Contract
Engineeringentry-levelFull TimeContract
-Closes Dec 14, 2026

Mandilas Group Limited is a conglomerate of companies with branches in different parts of the country. Our Core activities include Engineering / Air conditioning Sales, Installation and Service, Plumbing and Automobile Sales / Leasing / Service. We seek to recruit individuals with strong professional and academic credentials with cognate years of experience who will deliver value to stakeholders.

We are recruiting to fill the position below: Job Title: HVAC Engineer

Location: Lagos

Summary

To provide technical support, installation, maintenance, and troubleshooting services for HVAC and refrigeration systems, with core expertise in chillers, VRF/VRV systems, and industrial/commercial refrigeration units.

The role ensures optimal system performance, customer satisfaction, and adherence to safety and quality standards.

Key Responsibilities

Carry out installation, commissioning, and servicing of HVAC systems including: Air-cooled and water-cooled chillers VRF/VRV systems Split and packaged air conditioning units Cold rooms and refrigeration systems

Air-cooled and water-cooled chillers

VRF/VRV systems

Split and packaged air conditioning units

Cold rooms and refrigeration systems

Diagnose faults and perform corrective and preventive maintenance on HVAC and refrigeration equipment.

Execute routine service schedules and ensure timely completion of maintenance contracts (AMCs/SLAs).

Interpret technical drawings, wiring diagrams, and equipment manuals for accurate troubleshooting and repairs.

Conduct performance testing, system balancing, and efficiency optimization of installed systems.

Ensure proper refrigerant handling, leak detection, and compliance with environmental standards.

Provide technical support to clients and internal teams, including training on system operations where required.

Prepare detailed service reports, fault logs, and documentation after each assignment.

Ensure compliance with HSE policies, including safe handling of tools, equipment, and refrigerants.

Support in spare parts identification, requisition, and inventory control.

Liaise with OEMs and technical partners where advanced troubleshooting is required.

Salary N400,000 - N500,000 / month.

Apply Now

At a glance

Company

Mandilas Group Limited

Location

Lagos, Nigeria

Employment

Full Time

Work style

Contract

Experience

entry-level

Valid until

December 14, 2026

Created

October 14, 2026

More opportunities

Similar roles you might like

Crane And Lifting Equipment Specialist

SPIE Oil & Gas Services

Nigeria, Nigeria

full-time

SPIE Oil & Gas Services (part of the SPIE Group) provides a complete range of services to some of the world’s largest oil and gas companies through its network of offices in 25 countries across Africa, the Middle-East and Asia-Pacific. Our turnover has more than doubled in the last few years thanks to the dedication of our 4,000 employees to whom we give training, recognition, and genuine opportunities for career development. In order to support this growth, SPIE Oil & Gas Services is always seeking talented individuals to join its teams. We are recruiting to fill the position below: Job Title: Crane and Lifting Equipment Specialist Ref: 2026-44700 Location: Nigeria Job Description We are looking for Crane and Lifting Equipment Specialist to join its workforce AKPO project in Nigeria. Job Purpose This job is created to provide technical and economic leadership in the inspection, maintenance and reliability of cranes and lifting equipment according to safety standards. Job Dimensions To ensure cranes and lifting equipment reliability and availability according to safety standards. To ensure operational engineering processes, inspection and maintenance are efficiently carried out in strict compliance with safety policies and procedures on all lifting and marine equipment. To ensure crane and lifting equipment support as technical authority to the DW field operations in accordance with Company rules and statutory regulation. To analyse crane maintenance activities and lifting equipment performance from the technical and economic perspective and take action necessary to achieve company set objectives regarding efficiency, cost optimization and savings. To provide Marine lifting equipment support to Maintenance Operations Mechanical Static team when required. Activities To prepare all methods support and implementation of practice documents regarding preventative maintenance, inspection, and testing to be performed on AKPO & EGINA cranes and lifting equipment based on recognized best practice and applicable regulations. To prepare and develop specifications for new cranes and lifting equipment based on recognized international standards. Co-ordinate planned crane maintenance activities fleet-wide in conjunction with the Original Equipment Manufacturer (OEM). Manage specialized crane maintenance vendors interventions and contracts (Liebherr, Sparrow, National Oilwell Varco etc.) within SCM frame agreements (including technical scope of work) where applicable. Ensure the implementation and assurance of Company integrity management system compliance. Liaise with classification societies / third party design offices where applicable. Support DW TUPNI asset installations for all related crane issues (specifically for new cranes, specification for upgrades and heavy lift works on cranes). Liaise with crane manufacturers when required. Participate in and / or lead investigations for all crane related incidents across the fleet. Interface with DW INSPECTION Department for all crane related issues. Supervision until completion of 5-years major overhauls in all DW installations cranes (based on Contractor / OEM and CPLO reports). Follow spare parts stocks with Warehouse and Procurement. In Charge For all cranes: Review / Produce Maintenance Plan as per Vendor recommendations. Review / Correct / Create corrected BOMs in SAP, establish MRP parameters. Ensure equipment are certified by third parties. Review / Produce Maintenance Plan as per Vendor recommendations. Review / Correct / Create corrected BOMs in SAP, establish MRP parameters. Ensure equipment are certified by third parties. For all Hoist Winches: Review / Produce actual Maintenance Plan. Review / Correct / Create corrected BOMs in SAP, establish MRP parameters. Review / Produce actual Maintenance Plan. Requirements Formal education: B.Sc. Degree in Mechanical Engineering (2.1). Professional experience (number of years): 15 years of experience with: Technical knowledge and experience in Offshore cranes and hydraulic power transmission and control systems. Proven experience working with heavy machinery / equipment. Extensive experience within maintenance, fault finding, build and procurement of equipment projects. Technical knowledge and experience in Offshore cranes and hydraulic power transmission and control systems. Proven experience working with heavy machinery / equipment. Extensive experience within maintenance, fault finding, build and procurement of equipment projects. Team management, analytical and organizational skills. Computer literacy and knowledge of Computerized Maintenance Management System (SAP) is an advantage. Proficiency in English language. What can we offer you? Work for an international Group with operations on every continent. Experience a wide variety of professions within several activities: Outdoor networks and street lighting Information and communication systems Nuclear power Maintenance Oil and gas HVAC engineering Electrical engineering Mechanical engineering. Outdoor networks and street lighting Information and communication systems Nuclear power Maintenance Oil and gas HVAC engineering Electrical engineering Mechanical engineering. Working in energy and the environment.

a day ago

Instrument Tubing Fitter

SPIE Oil & Gas Services

Lagos, Nigeria

full-time

SPIE Oil & Gas Services (part of the SPIE Group) provides a complete range of services to some of the world’s largest oil and gas companies through its network of offices in 25 countries across Africa, the Middle-East and Asia-Pacific. Our turnover has more than doubled in the last few years thanks to the dedication of our 4,000 employees to whom we give training, recognition, and genuine opportunities for career development. In order to support this growth, SPIE Oil & Gas Services is always seeking talented individuals to join its teams. We are recruiting to fill the position below: Job Title: Instrument Tubing Fitter Reference: 2026-44683 Location: Offshore, Nigeria Job description SPIE Global Services Energy is looking for Instrument Tubing Fitter to join its workforce on BONGA Offshore Project in Lagos Nigeria. Interpret and work from P&IDs, tubing hook-up drawings, instrument installation drawings, isometric drawings, layouts, and construction specifications. Install, route, support, and terminate instrument tubing for pressure, temperature, level, flow, control and other instrumentation systems. Carry out installation of stainless steel, copper, carbon steel and other specified tubing materials in accordance with project specifications. Fabricate tubing runs by accurately measuring, cutting, bending, forming and assembling tubing to suit approved drawings and site conditions. Install and connect tube fittings, compression fittings, ferrule fittings, bulkhead fittings, manifolds, valves, needle valves, check valves and associated accessories. Perform tubing installation between instruments, impulse lines, manifolds, process connection points, control valves and junction/interface points. Ensure correct tubing routing, including proper slope, accessibility, clearance, supports, separation and protection against mechanical damage. Install tubing supports, clamps, brackets and mounting accessories in accordance with approved drawings and engineering requirements. Ensure tubing is correctly identified using tag numbers, line numbers, service identification and instrument references. Carry out tubing installation for instrument air, process impulse, pneumatic control, hydraulic and other utility services as specified in the project scope. Conduct tubing preparation activities including deburring, cleaning, flushing and protection of tube ends before connection. Ensure all tubing connections are properly assembled and tightened using the correct tools, torque requirements and manufacturer's installation procedures. Carry out leak testing, pressure testing, pneumatic testing and/or hydrostatic testing of tubing systems as required by approved procedures. Identify and rectify tubing installation defects such as leaks, incorrect routing, damaged tubing, loose fittings, improper bending or inadequate supports. Coordinate with Instrument Fitters, Instrument Technicians, Pipe Fitters, Welders, Electrical Technicians and other construction disciplines to resolve interface issues. Verify installed tubing against approved drawings, material specifications, instrument hook-up drawings and project standards before inspection. Assist QA/QC. QHSE: Ensures HSE policy fulfilment during his activities Maintains a strong safety culture in line with Company HSE Requirements and Rules Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity Management System, including permit-to-work (PTW) procedures, SIMOPS, tool box talks, and job hazard analyses (JHA). He/she shall immediately address and report any unsafe acts or conditions in the work area. Profile Education: Minimum of an HND or B.Sc Degree in Electrical Engineering, Electrical/Electronics Technology, or a related technical discipline Equivalent vocational training with relevant field experience will be considered Experience: Minimum of 8 - 10 years of hands-on experience in electrical construction on oil and gas EPC projects, with at least 4–5 years in a supervisory role specifically covering cable tray installation and cable routing. Experience on offshore platforms, FPSOs, or Deepwater projects is a strong advantage. Technical Competencies: Instrument tubing installation and fabrication Tube bending (Autoclave & Swageloks) and routing Compression fitting installation Instrument hook-up Stainless-steel tubing work Pneumatic and hydraulic tubing Pressure/leak testing Reading P&IDs and instrument hook-up drawings Tubing support installation Oil & Gas construction practices QA/QC inspection requirements Permit-to-Work and HSE compliance Ability to work at height and in confined/offshore environments where required Team coordination and productivity control. Certifications (Preferred): CompEx or equivalent hazardous area certification Working at Height certification Confined Space Entry. What can we offer you? Work for an international Group with operations on every continent. Experience a wide variety of professions within several activities: Outdoor networks and street lighting Information and communication systems Nuclear power Maintenance Oil and gas HVAC engineering Electrical engineering Mechanical engineering. Outdoor networks and street lighting Information and communication systems Nuclear power Maintenance Oil and gas HVAC engineering Electrical engineering Mechanical engineering. Working in energy and the environment.

a day ago

Cable Pulling Technician

SPIE Oil & Gas Services

Lagos, Nigeria

full-time

SPIE Oil & Gas Services (part of the SPIE Group) provides a complete range of services to some of the world’s largest oil and gas companies through its network of offices in 25 countries across Africa, the Middle-East and Asia-Pacific. Our turnover has more than doubled in the last few years thanks to the dedication of our 4,000 employees to whom we give training, recognition, and genuine opportunities for career development. In order to support this growth, SPIE Oil & Gas Services is always seeking talented individuals to join its teams. We are recruiting to fill the position below: Job Title: Cable Pulling Technician Reference: 2026-44679 Location: Offshore, Nigeria Job description SPIE Global Services Energy is looking for E&I Cable Pulling Tech to join its workforce on BONGA Offshore Project in Lagos Nigeria. Read and interpret cable schedules, cable routing layouts, termination drawings, wiring diagrams, P&IDs, tray layouts and installation specifications. Carry out cable pulling and installation activities for power, control, instrumentation, telecom, fiber-optic, fire alarm, CCTV and other ELV cables as assigned. Verify cable routes, tray availability, conduits, ducts and cable trenches before commencing cable-pulling activities. Inspect cable drums and verify cable type, size, length, drum number, tag number and destination against approved cable schedules. Set up cable drums, rollers, cable socks, pulling ropes, winches and other equipment required for safe and controlled cable installation. Perform manual and mechanical cable pulling while maintaining the manufacturer's specified maximum pulling tension, bending radius and installation requirements. Ensure cables are properly supported and arranged on cable trays, ladders, conduits, ducts, trenches and underground routes. Maintain proper cable separation between power, control, instrumentation, communication and intrinsically safe circuits in accordance with project requirements. Ensure cables are not damaged during installation and immediately report any cuts, crushing, excessive bending, sheath damage or other defects. Install cables with adequate slack at equipment, junction boxes, panels, marshalling cabinets and termination points to facilitate proper termination. Maintain correct cable identification by installing cable tags, markers, ferrules and destination labels at specified locations. Dress, arrange and secure installed cables using approved cable ties, cleats, clamps, straps and other cable-management materials. Ensure cables are installed neatly and maintain proper routing, spacing, accessibility and workmanship standards. Assist electricians and instrument technicians with cable preparation activities, including cable stripping, gland preparation and routing to termination points, within the technician's authorized scope. Assist with installation of cables through conduits, cable trays, ladders, underground ducts and cable trenches, including difficult or congested areas. Carry out cable pulling in accordance with approved Method Statements, Job Safety Analysis (JSA), Risk Assessments and Permit-to-Work (PTW) requirements. Conduct pre-pulling inspections. QHSE: Ensures HSE policy fulfilment during his activities Maintains a strong safety culture in line with Company HSE Requirements and Rules Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity Management System, including permit-to-work (PTW) procedures, SIMOPS, tool box talks, and job hazard analyses (JHA). He/she shall immediately address and report any unsafe acts or conditions in the work area. Profile Education: Minimum of an HND or B.Sc. Degree in Electrical Engineering, Electrical/Electronics Technology, or a related technical discipline. Equivalent vocational training with relevant field experience will be considered Experience: Minimum of 8–10 years of hands-on experience in electrical construction on oil and gas EPC projects, with at least 4–5 years in a supervisory role specifically covering cable tray installation and cable routing. Experience on offshore platforms, FPSOs, or Deepwater projects is a strong advantage. Technical Competencies: Cable pulling and installation Cable drum handling and management Cable tray and ladder installation interface Cable routing and dressing Power and control cable installation Instrumentation and telecom cable installation Fiber-optic cable handling awareness Cable identification and tagging Cable pulling tension and bending-radius control Cable cleating and securing Reading cable schedules and installation drawings Cable testing awareness Hazardous-area work practices PTW, JSA and HSE compliance QA/QC inspection and punch-list clearance. Certifications (Preferred): CompEx or equivalent hazardous area certification Working at Height certificate. Confined Space Entry. What can we offer you? Work for an international Group with operations on every continent. Experience a wide variety of professions within several activities: Outdoor networks and street lighting Information and communication systems Nuclear power Maintenance Oil and gas HVAC engineering Electrical engineering Mechanical engineering. Outdoor networks and street lighting Information and communication systems Nuclear power Maintenance Oil and gas HVAC engineering Electrical engineering Mechanical engineering. Working in energy and the environment.

a day ago

Head Of Mechanical

SPIE Oil & Gas Services

Nigeria, Nigeria

full-time

SPIE Oil & Gas Services (part of the SPIE Group) provides a complete range of services to some of the world’s largest oil and gas companies through its network of offices in 25 countries across Africa, the Middle-East and Asia-Pacific. Our turnover has more than doubled in the last few years thanks to the dedication of our 4,000 employees to whom we give training, recognition, and genuine opportunities for career development. In order to support this growth, SPIE Oil & Gas Services is always seeking talented individuals to join its teams. We are recruiting to fill the position below: Job Title: Head of Mechanical Ref: 2026-44699 Location: Nigeria Job Description We are looking for Head of Mechanical to join its workforce AKPO project in Nigeria. Job Dimensions Production level: during plateau period 114.000 bopd; 9.8 MSm3/D gas (AKPO). 200,000 bopd; 4.6 MSm3 / D gas (EGINA). Company staff managed (number of persons) during operations: 6. Contractors staff managed (number of persons) during operations: during campaigns about 10 p offshore Contractors. Budget (in Millions USD) Coordinates technically services for about 60 MUSD per year. Technology involved in the job: Gas Turbines, Compressors, Diesel Engines, Static Equipment, Pumps, other Mechanical items. Activities Responsible for the Technical content of the Maintenance Methods in the field of Mechanical, including the responsibility for maintenance plans, spare parts coverage, working techniques, and the procedures, in accordance with the Maintenance Policy. Revise the maintenance plans prepared by the various Contractors and ensure their proper implementation. Coordinate with the Methods Department the consolidation of the Maintenance Plans. Ensure suitable spare-parts availability / coverage through adequate stock management parameters; initiate the necessary improvements in accordance with the reliability, availability objectives and cost optimization. Perform the duties of Technical Administrator for the Mechanical Spare Parts. Develop and control proper implementation / use of the techniques and tools required for an efficient maintenance, including both technical (condition monitoring, working tools, etc) and administrative / reporting aspects (Work reports, data trending, spare parts consumption, etc). Responsible to control and ensure the data captured in SAP (UNISUP) are accurate; perform their analysis and propose optimization plans. Ensures proper management of the equipment support means including documentations, tooling, software, etc. Provides technical expertise in view of timely and efficiently address the failures and losses of performance of equipment. Analyse the equipment performances, perform technical studies, provide technical support on any technical queries, and make proposals for improvement and optimization. Perform modification studies as required. Ensure the operations under own authority are prepared and performed in accordance with Company rules, procedures and specifications, and in full compliance with the HSE standards. Responsible for the mobilisation, the coordination, the logistic arrangements, of the external resources (vendors, contractors, means, etc) required for the operations in own field of competence (mechanical). Includes initiation of call off, or service order, definition of scope of work, work performance follow-up, control / acceptance of deliverables, and any other duty until satisfactory completion of the required service. Requirements Engineer University Degree in Mechanical Engineering or equivalent. Good Knowledge in Turbo machineries. Minimum 10 years of experience as Mechanical Engineer including 5 in the Petrochemical industry. Minimum 5 years in supervisory operational position. What can we offer you? Work for an international Group with operations on every continent. Experience a wide variety of professions within several activities: Outdoor networks and street lighting Information and communication systems Nuclear power Maintenance Oil and gas HVAC engineering Electrical engineering Mechanical engineering. Outdoor networks and street lighting Information and communication systems Nuclear power Maintenance Oil and gas HVAC engineering Electrical engineering Mechanical engineering. Working in energy and the environment.

a day ago

Package Coordinator / Turbinist

SPIE Oil & Gas Services

Port Harcourt, Rivers, Nigeria

Full-time

SPIE Oil & Gas Services (part of the SPIE Group) provides a complete range of services to some of the world’s largest oil and gas companies through its network of offices in 25 countries across Africa, the Middle-East and Asia-Pacific. Our turnover has more than doubled in the last few years thanks to the dedication of our 4,000 employees to whom we give training, recognition, and genuine opportunities for career development. In order to support this growth, SPIE Oil & Gas Services is always seeking talented individuals to join its teams. We are recruiting to fill the position below: Job Title: Package Coordinator / Turbinist Ref: 2026-44695 Location: Port Harcourt, Rivers Key Responsibilities Operations: Organizes on-site maintenance operations related to turbo machines by coordinating supervisors. Assists the planning team by providing technical support for the preparation of the jobs in his discipline. Assists specialists working under Specific Maintenance Contracts (SMC), Ensures that COMPANY's HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, Manages interventions using the CMMS, Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Takes charge of the turbo packages in case of breakdown until correct operation status. Assists the operations team in conducting the turbo machines. Methods: Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications. Monitors the functioning of turbo machines by following important parameters of the packages, Quality Assurance: Verifies the quality of interventions by frequent on-site checks He is responsible for the reliability and integrity of turbo machines Purpose: He ensures that maintenance operations under his responsibility are carried out in strict accordance with COMPANY's current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by CONTRACTOR Requirements The holder of this position must have the following qualifications: Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years study) or BTS/DUT or equivalent. 3 to 5 years experience in the maintenance or operation field on gas turbines. Specific professional knowledge: Gas turbine Gas compressor Ability to lead and motivate multi-national teams, Pride in his work, ability to maintain good relations with colleagues and others, Physical ability to work on offshore installations in the climatic conditions of the site. What can we offer you? Work for an international Group with operations on every continent. Experience a wide variety of professions within several activities: Outdoor networks and street lighting Information and communication systems Nuclear power Maintenance Oil and gas HVAC engineering Electrical engineering Mechanical engineering. Outdoor networks and street lighting Information and communication systems Nuclear power Maintenance Oil and gas HVAC engineering Electrical engineering Mechanical engineering. Working in energy and the environment.

a day ago

Civil Engineer

PG Consulting Limited

Lagos, nigeria

full-time

Job Summary Our Client is seeking an experienced and highly competent Civil Engineer to join our Engineering Department. The successful candidate will be responsible for the engineering design, structural analysis, detailing coordination, quantity take-offs, Bills of Quantities (BOQ), Bills of Materials (BOM), technical specifications, and engineering support for all Civil Works associated with our industrial, commercial, and steel building projects. The primary focus of this role will be the design of reinforced concrete foundations, substructures, and Civil Works supporting Pre-Engineered Buildings (PEB) and Structural Steel projects. In addition, the successful candidate will provide engineering support for complete reinforced concrete buildings and multidisciplinary construction projects whenever required. The role requires strong technical expertise, sound engineering judgment, and close coordination with Structural Design, Steel Detailing, Production, Procurement, Project Management, Quantity Surveying, and Site Construction teams. Key Responsibilities Design reinforced concrete foundations for Pre-Engineered Buildings (PEB), Structural Steel Buildings, Industrial Plants, Warehouses, Factories, Commercial Buildings, and other construction projects. Design isolated footings, combined footings, strip footings, raft foundations, pile caps, machine foundations, pedestals, and column necks. Design reinforced concrete retaining walls, grade beams, tie beams, suspended slabs, ground slabs, staircases, ramps, equipment foundations, underground structures, and other reinforced concrete elements. Perform structural analysis and prepare engineering calculations, design reports, and technical documentation. Design foundations based on structural loading, geotechnical reports, soil bearing capacities, and project requirements. Prepare complete Bills of Quantities (BOQ), Bills of Materials (BOM), Material Take-Offs (MTO), and quantity calculations for all Civil Works. Review architectural, structural steel, geotechnical, survey, and MEP drawings to ensure complete engineering coordination. Prepare construction specifications, design sketches, engineering mark-ups, and technical recommendations. Coordinate anchor bolt layouts, embedded plates, sleeves, inserts, foundation elevations, and interfaces with the Structural Steel Engineering team. Coordinate with Architects, Mechanical, Electrical, Plumbing, and HVAC Engineers to ensure multidisciplinary integration and clash-free designs. Review architectural layouts and coordinate structural requirements within internal walls, openings, service penetrations, and building utilities. Qualifications Bachelor's Degree in Civil Engineering or Structural Engineering. Minimum 7 years of proven experience in reinforced concrete and civil works design. Proven experience in industrial, commercial, warehouse, factory, and infrastructure projects. Strong experience in designing reinforced concrete foundations supporting structural steel and Pre-Engineered Buildings (PEB). Proven ability to independently perform structural analysis and reinforced concrete design Experience in the structural design of complete reinforced concrete buildings, including residential, commercial, institutional, and industrial developments. Familiarity with architectural planning, internal wall layouts, building finishes, and multidisciplinary coordination. Experience reviewing and coordinating Mechanical, Electrical, Plumbing(MEP), HVAC, and Fire Protection drawings. Understanding of building services coordination and construction methodologies. Experience coordinating complete building projects from concept design through construction. Familiarity with ACI 318, ACI 350, BS 8110, Eurocode 2, Eurocode 7, AISC, MBMA, ASCE, or equivalent international design standards. Knowledge of BIM workflows and multidisciplinary project coordination. Experience with international engineering and construction projects. Software Requirements: ETABS SAP2000 AutoCAD CSI Column Microsoft Excel Microsoft Project Technical Knowledge: Reinforced Concrete Design Foundation Engineering Structural Analysis Retaining Wall Design Soil-Structure Interaction Geotechnical Engineering Principles Concrete Detailing BOQ, BOM & Material Take-Off (MTO) Mechanical, Electrical & Plumbing (MEP) Coordination Value Engineering.

5 days ago