Operations

Electrician

Tsebo Solution·KwaZulu-Natal, south-africa·Full Time·Contract
OperationsFull TimeContract
-Closes 17 Nov 2026
  • Tsebo Facilities Solutions is looking for a qualified Electrician to provide electrical maintenance, repair, testing, inspection, and installation services to clients in accordance with contractual service level agreements. The role is responsible for carrying out reactive repairs, preventative maintenance, fault finding, compliance inspections, and emergency repairs while ensuring adherence to SHEQ standards and statutory regulations.

Duties & Responsibilities

Electrical Maintenance and Repairs

  • Perform reactive and planned maintenance on electrical installations, equipment, and systems.
  • Diagnose electrical faults and implement effective corrective actions.
  • Conduct inspections, testing, verification, and certification of electrical installations.
  • Ensure electrical work complies with Occupational Health and Safety Act requirements and electrical regulations.
  • Carry out repairs and maintenance on emergency generators.
  • Provide basic maintenance support on air-conditioning systems and plumbing fixtures where required.
  • Complete work orders within prescribed service level agreements.

Technical and Site Support

  • Prepare comprehensive site reports following inspections and maintenance activities.
  • Provide technical information required for quotation preparation, including material specifications and part numbers.
  • Assist with technical assessments and recommendations for repairs and upgrades.
  • Ensure all required documentation is completed accurately and submitted on time.

Client and Stakeholder Management

  • Establish and maintain professional working relationships with clients, suppliers, contractors, and site representatives.
  • Communicate progress, findings, and recommendations clearly to clients.
  • Ensure customer requirements are addressed efficiently and professionally.
  • Provide a high standard of service to maintain customer satisfaction.

Asset, Tools and Vehicle Management

  • Ensure company vehicles are maintained in a clean, roadworthy, and professional condition.
  • Complete daily vehicle inspections and mileage reports.
  • Monitor servicing schedules, tyre conditions, and vehicle compliance requirements.
  • Maintain all tools and equipment in good working order.
  • Report damaged, defective, or missing tools and equipment immediately.

Stock and Procurement Management

  • Monitor stock levels and maintain adequate spare parts inventory.
  • Procure emergency materials and parts from approved suppliers using authorized company credit facilities.
  • Submit all supporting documentation and invoices for emergency purchases.
  • Ensure cost-effective use of materials and company resources.

Administration and Reporting

  • Submit daily documentation, including:
  • Vehicle mileage and inspection reports.
  • Site reports and work orders.
  • Purchase invoices.
  • Fuel slips.
  • Technical reports and quotation information.
  • Maintain accurate maintenance records and service history documentation.
  • Ensure timely completion of statutory and compliance-related records.

Supervision and Team Support

  • Supervise General Assistants or support personnel when assigned.
  • Provide guidance and ensure tasks are completed safely and efficiently.
  • Promote teamwork and safe working practices on-site.

SHEQ Compliance

  • Adhere to all Tsebo Safety, Health, Environmental and Quality (SHEQ) policies and procedures.
  • Conduct all work in accordance with legal and statutory requirements.
  • Promote a safe working environment and comply with emergency procedures.
  • Report incidents, hazards, and near misses in line with company processes.

Ad Hoc Duties

  • Perform any reasonable duties requested by management.
  • Be available for overtime, after-hours call-outs, standby duties, and weekend work when required.
  • Travel to various client sites to provide maintenance services.

Skills and Competencies

  • Electrical fault finding and diagnostics.
  • Electrical installations, testing, and certification.
  • Preventative and reactive maintenance.
  • Generator maintenance and repairs.
  • Reading electrical drawings and schematics.
  • Occupational Health and Safety compliance.
  • Technical reporting and quotation preparation.
  • Client relationship management.
  • Basic project management.
  • Budget and cost control.
  • Microsoft Office applications.
  • Stock and material management.

Qualifications

  • NQF Level 5 in Electrical Engineering.
  • Qualified Electrical Trade Test Certificate.
  • Wireman's License registered with the Department of Labour.
  • Registered Installation Electrician in terms of the Occupational Health and Safety Act Electrical Installation Regulations.
  • Valid Driver's Licence.

Experience

  • Minimum 5 years' maintenance and electrical service experience.
  • Experience in testing, fault finding, repairs, and maintenance of electrical systems.
  • Experience servicing and repairing emergency generators.
  • Basic knowledge of air-conditioning systems and plumbing maintenance.
  • Sound knowledge of Occupational Health and Safety legislation.
  • Experience preparing quotations, service reports, and technical documentation.
  • Experience working within facilities maintenance or technical services environments.

Deadline:16th November,2026

Key skills

MatricNational Certificate (NCV)

At a glance

Company

Tsebo Solution

Location

KwaZulu-Natal, south-africa

Employment

Full Time

Experience

Valid until

November 17, 2026

Created

November 10, 2026

More opportunities

Similar roles you might like

Cts 19839 - Technical Manager (electrical / Instrumentation) Gauteng

Professional Career Services

Johannesburg, Gauteng, south-africa

FULL_TIME

Employer Description This company is a manufacturer and supplier instrumentation equipment for the mining sector. Job Description Your responsibilities will be the following below: Perform general technical and physical labour tasks involving tools, equipment. Manage repairs, maintenance, and installation of instrumentation and electrical equipment. Conduct field service work both in-house and on customer sites (surface and underground operations). Complete all related administrative tasks and reporting. Provide professional communication and feedback to customers and management. Lead and manage technical staff, customer SLAs, and supplier relationships. Oversee technical projects from planning through to testing and implementation. Conduct product training for staff and customers. Support sales activities through product demonstrations and technical expertise. Manage operational stock, logistics, costs, and pricing. Perform technical audits to ensure quality and performance standards. Drive continuous improvement, technical development, and team performance. Qualifications Matric National Diploma or Degree in Electrical Engineering, Electronics Engineering, Instrumentation. Trade Test qualification (Electrician, Instrument Mechanician, or similar) will be advantageous. Skills Minimum 10 years technical experience in electrical, instrumentation, or mining-related environments. Minimum 5 years management or supervisory experience. Strong computer literacy, including Microsoft Office and technical software applications. Experience working in both surface and underground mining environments will be advantageous. Valid driver's licence and willingness to travel to customer sites. Benefits Medical Aid Pension Fund

4 days ago

Junior Battery Technician

Staff Solutions

Eastern Cape, south-africa

full-time

About the Position Our client is seeking a motivated and technically skilled Junior Battery Technician to join their team. The successful candidate will be responsible for diagnosing faults, repairing, rebuilding, servicing and testing lead-acid and lithium batteries, as well as battery chargers. The role requires strong electrical and technical knowledge, attention to detail, and a commitment to maintaining high standards of quality, safety and customer service while ensuring efficient turnaround times and reliable equipment performance. Key Performance Areas and Responsibilities To perform this job successfully, the appointed individual must be able to perform each essential duty and key performance area satisfactorily. The responsibilities listed below are not exhaustive and may be amended, expanded or supplemented from time to time to accommodate changing business needs. Fault Diagnosis, Troubleshooting and Repairs Accurately diagnose faults, troubleshoot equipment and perform the necessary repairs in the event of equipment breakdowns. Identify and communicate required repairs to customers and/or supervisors, providing appropriate advice and recommendations. Perform repairs and maintenance at customer sites and/or in the workshop. Use a multimeter correctly to test batteries, identify faults and troubleshoot complete battery systems. Read, interpret and respond appropriately to battery assessment and technical reports. Access, repair and replace faulty battery accessories and electrical components as required. Battery Assembly, Rebuilding and Maintenance Assemble new batteries in accordance with the correct layout, configuration and polarity requirements. Select and install the correct cells in the appropriate tanks according to the relevant machine model and specifications. Cut and fit packing materials correctly to secure and stabilise cells within battery tanks. Safely remove cells that are wedged or difficult to extract from battery tanks. Strip, rebuild, service and repair lead-acid and lithium batteries, as well as battery chargers. Perform acid adjustments on lead-acid batteries when required and in accordance with applicable procedures and safety requirements. Paint, clean and mark steel battery tanks as and when necessary. Complete battery assembly and rebuilding tasks within the specified timeframes. Conduct thorough quality checks upon completion of assembly, rebuilding or repair work to ensure that batteries meet the required standards and are safe to operate. Battery Testing and Quality Assurance Test batteries, chargers and associated electrical components to verify their functionality and operational safety. Ensure that all completed repairs, assemblies and servicing comply with relevant technical specifications, quality standards and operating requirements. Verify that batteries and chargers are safe and fit for operation before being returned to customers or placed into service. Delivery and Field Service Deliver batteries and battery chargers to customers as required. Provide technical support and perform field service duties at customer premises when required. Ensure that all work performed at customer sites is completed professionally, safely and in accordance with applicable procedures and standards. Health, Safety and Housekeeping Comply with the Occupational Health and Safety Act (OHSACT), applicable regulations and established safety procedures when working in workshops and on customer premises. Maintain a safe working environment by ensuring that batteries, chargers, tools and equipment are handled, tested, repaired and maintained safely. Follow established safety standards, work instructions and procedures, and comply with all applicable legal and regulatory requirements. Maintain a clean, organised and tidy workshop and ensure that tools, equipment and work areas are kept in good order. Technical Development and Continuous Improvement Maintain and improve technical knowledge and job-related skills by participating in relevant training, educational opportunities and professional development activities. Keep up to date with developments in battery technology, electrical components, battery charging systems, troubleshooting methods and repair procedures. Required Minimum Knowledge, Skills, Education, Training and Experience National Diploma in Electrical Engineering. Minimum of three years' experience working with lithium batteries and electrical components. Qualified electrician or electronics technician, with practical experience in lithium batteries, lead-acid batteries and battery charging equipment. General working knowledge of battery systems, battery chargers and their associated electrical systems. Required Certificates, Licences and Registrations National Diploma in Electrical Engineering. 3-5 years experience Valid Code 8 or Code 10 driver's licence, applicable to field service technicians. Valid forklift operator's licence.

4 days ago

Battery Technician

Staff Solutions

Eastern Cape, south-africa

full-time

About the Position Our client is seeking a motivated and technically skilled Battery Technician to join their team. The successful candidate will be responsible for diagnosing faults, repairing, rebuilding, servicing and testing lead-acid and lithium batteries, as well as battery chargers. The role requires strong electrical and technical knowledge, attention to detail, and a commitment to maintaining high standards of quality, safety and customer service while ensuring efficient turnaround times and reliable equipment performance. Key Performance Areas and Responsibilities To perform this job successfully, the appointed individual must be able to perform each essential duty and key performance area satisfactorily. The responsibilities listed below are not exhaustive and may be amended, expanded or supplemented from time to time to accommodate changing business needs. Fault Diagnosis, Troubleshooting and Repairs Accurately diagnose faults, troubleshoot equipment and perform the necessary repairs in the event of equipment breakdowns. Identify and communicate required repairs to customers and/or supervisors, providing appropriate advice and recommendations. Perform repairs and maintenance at customer sites and/or in the workshop. Use a multimeter correctly to test batteries, identify faults and troubleshoot complete battery systems. Read, interpret and respond appropriately to battery assessment and technical reports. Access, repair and replace faulty battery accessories and electrical components as required. Battery Assembly, Rebuilding and Maintenance Assemble new batteries in accordance with the correct layout, configuration and polarity requirements. Select and install the correct cells in the appropriate tanks according to the relevant machine model and specifications. Cut and fit packing materials correctly to secure and stabilise cells within battery tanks. Safely remove cells that are wedged or difficult to extract from battery tanks. Strip, rebuild, service and repair lead-acid and lithium batteries, as well as battery chargers. Perform acid adjustments on lead-acid batteries when required and in accordance with applicable procedures and safety requirements. Paint, clean and mark steel battery tanks as and when necessary. Complete battery assembly and rebuilding tasks within the specified timeframes. Conduct thorough quality checks upon completion of assembly, rebuilding or repair work to ensure that batteries meet the required standards and are safe to operate. Battery Testing and Quality Assurance Test batteries, chargers and associated electrical components to verify their functionality and operational safety. Ensure that all completed repairs, assemblies and servicing comply with relevant technical specifications, quality standards and operating requirements. Verify that batteries and chargers are safe and fit for operation before being returned to customers or placed into service. Delivery and Field Service Deliver batteries and battery chargers to customers as required. Provide technical support and perform field service duties at customer premises when required. Ensure that all work performed at customer sites is completed professionally, safely and in accordance with applicable procedures and standards. Health, Safety and Housekeeping Comply with the Occupational Health and Safety Act (OHSACT), applicable regulations and established safety procedures when working in workshops and on customer premises. Maintain a safe working environment by ensuring that batteries, chargers, tools and equipment are handled, tested, repaired and maintained safely. Follow established safety standards, work instructions and procedures, and comply with all applicable legal and regulatory requirements. Maintain a clean, organised and tidy workshop and ensure that tools, equipment and work areas are kept in good order. Technical Development and Continuous Improvement Maintain and improve technical knowledge and job-related skills by participating in relevant training, educational opportunities and professional development activities. Keep up to date with developments in battery technology, electrical components, battery charging systems, troubleshooting methods and repair procedures. Required Minimum Knowledge, Skills, Education, Training and Experience National Diploma in Electrical Engineering. Minimum of 5 years' experience working with lithium batteries and electrical components. Qualified electrician or electronics technician, with practical experience in lithium batteries, lead-acid batteries and battery charging equipment. General working knowledge of battery systems, battery chargers and their associated electrical systems. Required Certificates, Licences and Registrations National Diploma in Electrical Engineering. 5 years experience Valid Code 8 or Code 10 driver's licence, applicable to field service technicians. Valid forklift operator's licence.

4 days ago

Maintenance Planner

Green Marble Recruitment

KwaZulu-Natal, south-africa

full-time

Join a leading, established organisation as an experienced Maintenance Planner and play a key role in ensuring efficient and proactive maintenance operations. Minimum Requirements: Grade 12. N6/T3/S4 Diploma or equivalent in Engineering will be advantageous. Trade Test as an Electrician, Millwright or Fitter will be advantageous. Minimum 5 years' experience in maintenance planning. Minimum 3 years' experience within a high-speed manufacturing environment. MS Project is essential. Proficiency in MS Office 365. Working knowledge of CMMS systems. Knowledge of SHEQ. Strong organisational and time management skills. Excellent attention to detail. Duties and responsibilities: Plan and schedule engineering maintenance activities across daily, weekly, monthly, yearly, and shutdown programmes. Coordinate planned and ad hoc maintenance activities with the Engineering team. Assist with preparing and updating weekly maintenance plans and schedules. Schedule and allocate preventative maintenance tasks to resources through the CMMS. Maintain and update preventative maintenance master data. Follow up on completed projects and analyse maintenance feedback. Update equipment Bills of Materials (BOMs) and add new components to the system. Maintain and update the Critical Spares List. Create purchase requisitions for Electrical, Services, Process, Safety, Mechanical, Stores, and Projects requirements. Coordinate consumable orders and ensure the required approvals are obtained. Monitor and report on weekly maintenance execution, schedule compliance, breakdowns, and artisan productivity. Analyse maintenance history and report findings to management. Review job cards and verify the integrity and accuracy of maintenance data captured by artisans. Assist with analysing maintenance shutdown costs. Work closely with Engineering Stores to ensure spares are available for planned maintenance. Support Engineering team safety requirements, including LOTO, PTW, and SOPs. Perform general maintenance-related administration as required. Compile maintenance reports using collected and analysed data in the prescribed formats.

4 days ago

Section Manager With Nqf 6 B/degree Engineering & Qcto In Electrical Or Millwright - Port Elizabeth

West Coast Personnel

Eastern Cape, south-africa

full-time

An experienced and hands-on Section Manager to lead Charge Room operations within a manufacturing environment. Reporting to the Production Manager, you will drive production performance, coordinate maintenance activities, lead Shift Supervisors and ensure production targets are achieved through continuous improvement. Minimum Requirements: Grade 12 (Matric). National Certificate in Engineering, Electrical or Technical Field (NQF 5). Trade Tested Electrician or Millwright. Certificate in Accounting and Leadership/Supervisory Management. Diploma (NQF 6) or Bachelor's Degree in Engineering (NQF 7) advantageous. 10 years' experience in electrical production/manufacturing operations. 5 years' supervisory or management experience. Computer literate (MS Office and production systems). Technical Competencies: Production and manufacturing management. Maintenance planning and coordination. Continuous improvement and process optimisation. Production planning and performance monitoring. Risk, compliance and budget management. Staff leadership and performance management. Key Responsibilities: Design, implement and improve production systems to maximise efficiency, productivity and output. Monitor production performance, investigate deviations and implement corrective action plans. Work closely with Engineering, Production Control and Maintenance teams to optimise equipment availability. Coordinate maintenance schedules to minimise downtime and meet production targets. Ensure production standards, procedures and operating methods are consistently implemented. Identify operational risks and maintain compliance with company policies and regulatory requirements. Build effective relationships with internal stakeholders and represent the department in operational meetings. Lead, coach and develop Shift Supervisors through performance management and employee development initiatives. Contribute to budgeting, monitor expenditure and identify cost-saving opportunities. Promote continuous improvement initiatives across production operations. Behavioural Competencies: Strong leadership and supervisory skills. Proactive and action orientated. Excellent planning and organisational ability. Analytical with strong problem-solving skills. Resilient and adaptable under pressure. Customer and stakeholder focused. Excellent verbal and written communication skills.

5 days ago